commit 8fb1aa51f8d14747bd21d9e113a8dd301a2f07dc
Author: Jean-Marc Lasgouttes <[email protected]>
Date: Fri Jul 25 22:35:08 2014 +0200
Whitespace only
diff --git a/src/BufferView.cpp b/src/BufferView.cpp
index bc8162b..faa08f0 100644
--- a/src/BufferView.cpp
+++ b/src/BufferView.cpp
@@ -118,12 +118,12 @@ bool findNextInset(DocIterator & dit, vector<InsetCode>
const & codes,
while (tmpdit) {
Inset const * inset = tmpdit.nextInset();
if (inset) {
- bool const valid_code = std::find(codes.begin(),
codes.end(),
+ bool const valid_code = std::find(codes.begin(),
codes.end(),
inset->lyxCode()) != codes.end();
InsetCommand const * ic = inset->asInsetCommand();
bool const same_or_no_contents = contents.empty()
|| (ic && (ic->getFirstNonOptParam() ==
contents));
-
+
if (valid_code && same_or_no_contents) {
dit = tmpdit;
return true;
@@ -228,7 +228,7 @@ struct BufferView::Private
Private(BufferView & bv): wh_(0), cursor_(bv),
anchor_pit_(0), anchor_ypos_(0),
inlineCompletionUniqueChars_(0),
- last_inset_(0), clickable_inset_(false),
+ last_inset_(0), clickable_inset_(false),
mouse_position_cache_(),
bookmark_edit_position_(-1), gui_(0)
{}
@@ -325,9 +325,9 @@ BufferView::~BufferView()
fp.pit = d->cursor_.bottom().pit();
fp.pos = d->cursor_.bottom().pos();
theSession().lastFilePos().save(buffer_.fileName(), fp);
-
+
if (d->last_inset_)
- d->last_inset_->setMouseHover(this, false);
+ d->last_inset_->setMouseHover(this, false);
delete d;
}
@@ -498,7 +498,7 @@ void BufferView::updateScrollbar()
d->scrollbarParameters_.page_step = height_;
Text & t = buffer_.text();
- TextMetrics & tm = d->text_metrics_[&t];
+ TextMetrics & tm = d->text_metrics_[&t];
LYXERR(Debug::GUI, " Updating scrollbar: height: "
<< t.paragraphs().size()
@@ -658,7 +658,7 @@ void BufferView::setCursorFromScrollbar()
case CUR_INSIDE:
int const y = getPos(oldcur).y_;
newy = min(last, max(y, first));
- if (y == newy)
+ if (y == newy)
return;
}
// We reset the cursor because cursorStatus() does not
@@ -778,7 +778,7 @@ bool BufferView::moveToPosition(pit_type bottom_pit,
pos_type bottom_pos,
// the bookmark.
if (bottom_pit < int(buffer_.paragraphs().size())) {
dit = doc_iterator_begin(&buffer_);
-
+
dit.pit() = bottom_pit;
dit.pos() = min(bottom_pos, dit.paragraph().size());
success = true;
@@ -958,7 +958,7 @@ void BufferView::makeDocumentClass()
void BufferView::updateDocumentClass(DocumentClassConstPtr olddc)
{
message(_("Converting document to new document class..."));
-
+
StableDocIterator backcur(d->cursor_);
ErrorList & el = buffer_.errorList("Class Switch");
cap::switchBetweenClasses(
@@ -1222,7 +1222,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
Cursor & cur = d->cursor_;
// Don't dispatch function that does not apply to internal buffers.
- if (buffer_.isInternal()
+ if (buffer_.isInternal()
&& lyxaction.funcHasFlag(cmd.action(), LyXAction::NoInternal))
return;
@@ -1246,7 +1246,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
<< (unknown_tokens == 1 ? "" :
"s"));
}
updateDocumentClass(olddc);
-
+
// We are most certainly here because of a change in the
document
// It is then better to make sure that all dialogs are in sync
with
// current document settings.
@@ -1254,7 +1254,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
dr.forceBufferUpdate();
break;
}
-
+
case LFUN_LAYOUT_MODULES_CLEAR: {
cur.recordUndoFullDocument();
buffer_.params().clearLayoutModules();
@@ -1267,7 +1267,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
case LFUN_LAYOUT_MODULE_ADD: {
BufferParams const & params = buffer_.params();
if (!params.layoutModuleCanBeAdded(argument)) {
- LYXERR0("Module `" << argument <<
+ LYXERR0("Module `" << argument <<
"' cannot be added due to failed requirements
or "
"conflicts with installed modules.");
break;
@@ -1281,9 +1281,9 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
}
case LFUN_TEXTCLASS_APPLY: {
- // since this shortcircuits, the second call is made only if
+ // since this shortcircuits, the second call is made only if
// the first fails
- bool const success =
+ bool const success =
LayoutFileList::get().load(argument,
buffer_.temppath()) ||
LayoutFileList::get().load(argument,
buffer_.filePath());
if (!success) {
@@ -1310,12 +1310,12 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
}
case LFUN_TEXTCLASS_LOAD: {
- // since this shortcircuits, the second call is made only if
+ // since this shortcircuits, the second call is made only if
// the first fails
- bool const success =
+ bool const success =
LayoutFileList::get().load(argument,
buffer_.temppath()) ||
LayoutFileList::get().load(argument,
buffer_.filePath());
- if (!success) {
+ if (!success) {
docstring s = bformat(_("The document class `%1$s' "
"could not be loaded."),
from_utf8(argument));
frontend::Alert::error(_("Could not load class"), s);
@@ -1381,7 +1381,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
}
break;
}
-
+
case LFUN_PARAGRAPH_GOTO: {
int const id = convert<int>(cmd.getArg(0));
int const pos = convert<int>(cmd.getArg(1));
@@ -1459,7 +1459,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
// FIXME: Move this LFUN to Buffer so that we don't have to do
this:
dr.screenUpdate(Update::Force | Update::FitCursor);
break;
-
+
case LFUN_CHANGE_PREVIOUS:
findPreviousChange(this);
// FIXME: Move this LFUN to Buffer so that we don't have to do
this:
@@ -1620,7 +1620,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
case LFUN_SCREEN_SHOW_CURSOR:
showCursor();
break;
-
+
case LFUN_SCREEN_RECENTER:
recenter();
break;
@@ -1648,7 +1648,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
if (inset->delDatabase(cmd.argument())) {
buffer_.invalidateBibfileCache();
dr.forceBufferUpdate();
- }
+ }
}
break;
}
@@ -1726,13 +1726,13 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
updateHoveredInset();
d->text_metrics_[&buffer_.text()].editXY(cur, p.x_, p.y_,
- true, act == LFUN_SCREEN_UP);
+ true, act == LFUN_SCREEN_UP);
//FIXME: what to do with cur.x_target()?
bool update = in_texted && cur.bv().checkDepm(cur, old);
cur.finishUndo();
if (update || cur.mark())
- dr.screenUpdate(Update::Force | Update::FitCursor);
+ dr.screenUpdate(Update::Force | Update::FitCursor);
if (update)
dr.forceBufferUpdate();
break;
@@ -1898,7 +1898,7 @@ void BufferView::dispatch(FuncRequest const & cmd,
DispatchResult & dr)
if (decodeInsetParam(name, data, buffer_))
lyx::dispatch(FuncRequest(LFUN_DIALOG_SHOW, name + " "
+ data));
else
- lyxerr << "Inset type '" << name <<
+ lyxerr << "Inset type '" << name <<
"' not recognized in LFUN_DIALOG_SHOW_NEW_INSET" <<
endl;
break;
}
@@ -2108,10 +2108,10 @@ void BufferView::updateHoveredInset() const
need_redraw |= d->last_inset_->setMouseHover(this, false);
d->last_inset_ = 0;
}
-
+
if (covering_inset && covering_inset->setMouseHover(this, true)) {
need_redraw = true;
- // Only the insets that accept the hover state, do
+ // Only the insets that accept the hover state, do
// clear the last_inset_, so only set the last_inset_
// member if the hovered setting is accepted.
d->last_inset_ = covering_inset;
@@ -2119,9 +2119,9 @@ void BufferView::updateHoveredInset() const
if (need_redraw) {
LYXERR(Debug::PAINTING, "Mouse hover detected at: ("
- << d->mouse_position_cache_.x_ << ", "
+ << d->mouse_position_cache_.x_ << ", "
<< d->mouse_position_cache_.y_ << ")");
-
+
d->update_strategy_ = DecorationUpdate;
// This event (moving without mouse click) is not passed
further.
@@ -2197,7 +2197,7 @@ void BufferView::mouseEventDispatch(FuncRequest const &
cmd0)
if (badcursor)
cursor().fixIfBroken();
}
-
+
// Do we have a selection?
theSelection().haveSelection(cursor().selection());
@@ -2431,8 +2431,8 @@ bool BufferView::checkDepm(Cursor & cur, Cursor & old)
return false;
d->cursor_ = cur;
-
- // we would rather not do this here, but it needs to be done before
+
+ // we would rather not do this here, but it needs to be done before
// the changed() signal is sent.
buffer_.updateBuffer();
@@ -2460,7 +2460,7 @@ bool BufferView::mouseSetCursor(Cursor & cur, bool select)
d->cursor_.fixIfBroken();
// FIXME: shift-mouse selection doesn't work well across insets.
- bool const do_selection =
+ bool const do_selection =
select && &d->cursor_.normalAnchor().inset() ==
&cur.inset();
// do the dEPM magic if needed
@@ -2576,7 +2576,7 @@ bool BufferView::singleParUpdate()
// (if this paragraph contains insets etc., rebreaking will
// recursively descend)
tm.redoParagraph(bottom_pit);
- ParagraphMetrics const & pm = tm.parMetrics(bottom_pit);
+ ParagraphMetrics const & pm = tm.parMetrics(bottom_pit);
if (pm.height() != old_height)
// Paragraph height has changed so we cannot proceed to
// the singlePar optimisation.
@@ -2613,7 +2613,7 @@ void BufferView::updateMetrics()
// make sure inline completion pointer is ok
if (d->inlineCompletionPos_.fixIfBroken())
d->inlineCompletionPos_ = DocIterator();
-
+
if (d->anchor_pit_ >= npit)
// The anchor pit must have been deleted...
d->anchor_pit_ = npit - 1;
@@ -2621,19 +2621,19 @@ void BufferView::updateMetrics()
// Rebreak anchor paragraph.
tm.redoParagraph(d->anchor_pit_);
ParagraphMetrics & anchor_pm = tm.par_metrics_[d->anchor_pit_];
-
+
// position anchor
if (d->anchor_pit_ == 0) {
int scrollRange = d->scrollbarParameters_.max -
d->scrollbarParameters_.min;
-
+
// Complete buffer visible? Then it's easy.
if (scrollRange == 0)
d->anchor_ypos_ = anchor_pm.ascent();
-
+
// FIXME: Some clever handling needed to show
// the _first_ paragraph up to the top if the cursor is
// in the first line.
- }
+ }
anchor_pm.setPosition(d->anchor_ypos_);
LYXERR(Debug::PAINTING, "metrics: "
@@ -2727,14 +2727,14 @@ Point BufferView::coordOffset(DocIterator const & dit)
const
CursorSlice const & sl = dit[i];
int xx = 0;
int yy = 0;
-
+
// get relative position inside sl.inset()
sl.inset().cursorPos(*this, sl, dit.boundary() && (i + 1 ==
dit.depth()), xx, yy);
-
+
// Make relative position inside of the edited inset relative
to sl.inset()
x += xx;
y += yy;
-
+
// In case of an RTL inset, the edited inset will be positioned
to the left
// of xx:yy
if (sl.text()) {
@@ -2759,7 +2759,7 @@ Point BufferView::coordOffset(DocIterator const & dit)
const
Dimension const dim = sl.inset().dimension(*this);
lastw = dim.wid;
}
-
+
//lyxerr << "Cursor::getPos, i: "
// << i << " x: " << xx << " y: " << y << endl;
}
@@ -2788,20 +2788,20 @@ Point BufferView::coordOffset(DocIterator const & dit)
const
for (size_t rit = 0; rit != rend; ++rit)
y += pm.rows()[rit].height();
y += pm.rows()[rend].ascent();
-
+
TextMetrics const & bottom_tm = textMetrics(dit.bottom().text());
-
+
// Make relative position from the nested inset now bufferview absolute.
int xx = bottom_tm.cursorX(dit.bottom(), dit.boundary() && dit.depth()
== 1);
x += xx;
-
- // In the RTL case place the nested inset at the left of the cursor in
+
+ // In the RTL case place the nested inset at the left of the cursor in
// the outer paragraph
bool boundary_1 = dit.boundary() && 1 == dit.depth();
bool rtl = bottom_tm.isRTL(dit.bottom(), boundary_1);
if (rtl)
x -= lastw;
-
+
return Point(x, y);
}
@@ -2815,7 +2815,7 @@ Point BufferView::getPos(DocIterator const & dit) const
TextMetrics const & tm = textMetrics(bot.text());
// offset from outer paragraph
- Point p = coordOffset(dit);
+ Point p = coordOffset(dit);
p.y_ += tm.parMetrics(bot.pit()).position();
return p;
}
@@ -2901,9 +2901,9 @@ void BufferView::draw(frontend::Painter & pain)
// and possibly grey out below
pair<pit_type, ParagraphMetrics const *> lastpm = tm.last();
int const y2 = lastpm.second->position() +
lastpm.second->descent();
-
+
if (y2 < height_) {
- Color color = buffer().isInternal()
+ Color color = buffer().isInternal()
? Color_background : Color_bottomarea;
pain.fillRectangle(0, y2, width_, height_ - y2, color);
}
@@ -3057,7 +3057,7 @@ bool samePar(DocIterator const & a, DocIterator const & b)
}
-void BufferView::setInlineCompletion(Cursor const & cur, DocIterator const &
pos,
+void BufferView::setInlineCompletion(Cursor const & cur, DocIterator const &
pos,
docstring const & completion, size_t uniqueChars)
{
uniqueChars = min(completion.size(), uniqueChars);
@@ -3066,9 +3066,9 @@ void BufferView::setInlineCompletion(Cursor const & cur,
DocIterator const & pos
bool singlePar = true;
d->inlineCompletion_ = completion;
d->inlineCompletionUniqueChars_ = min(completion.size(), uniqueChars);
-
+
//lyxerr << "setInlineCompletion pos=" << pos << " completion=" <<
completion << " uniqueChars=" << uniqueChars << std::endl;
-
+
// at new position?
DocIterator const & old = d->inlineCompletionPos_;
if (old != pos) {
@@ -3081,7 +3081,7 @@ void BufferView::setInlineCompletion(Cursor const & cur,
DocIterator const & pos
}
d->inlineCompletionPos_ = pos;
}
-
+
// set update flags
if (changed) {
if (singlePar && !(cur.result().screenUpdate() & Update::Force))
@@ -3093,8 +3093,8 @@ void BufferView::setInlineCompletion(Cursor const & cur,
DocIterator const & pos
bool BufferView::clickableInset() const
-{
- return d->clickable_inset_;
+{
+ return d->clickable_inset_;
}
} // namespace lyx
diff --git a/src/BufferView.h b/src/BufferView.h
index a94ddfd..a144aee 100644
--- a/src/BufferView.h
+++ b/src/BufferView.h
@@ -155,7 +155,7 @@ public:
/// Ensure that the BufferView cursor is visible.
/// This method will automatically scroll and update the BufferView
/// if needed.
- void showCursor();
+ void showCursor();
/// Ensure the passed cursor \p dit is visible.
/// This method will automatically scroll and update the BufferView
/// if needed.
diff --git a/src/RowPainter.cpp b/src/RowPainter.cpp
index bf9f280..4f7e667 100644
--- a/src/RowPainter.cpp
+++ b/src/RowPainter.cpp
@@ -239,7 +239,7 @@ void RowPainter::paintChars(pos_type & vpos, Font const &
font)
++pos;
++start_pos;
swap(start_pos, pos);
- }
+ }
// at least part of text selected?
bool const some_sel = (pos >= row_.sel_beg && start_pos < row_.sel_end)
diff --git a/src/TextMetrics.cpp b/src/TextMetrics.cpp
index 540537b..a5f0364 100644
--- a/src/TextMetrics.cpp
+++ b/src/TextMetrics.cpp
@@ -613,7 +613,7 @@ void TextMetrics::computeRowMetrics(pit_type const pit,
/** If we have separators, and this row has
* not be broken abruptly by a display inset
* or newline, then stretch it */
- if (ns && !row.right_boundary()
+ if (ns && !row.right_boundary()
&& row.endpos() != par.size()) {
setSeparatorWidth(row, w / ns);
row.dimension().wid = width;
diff --git a/src/TextMetrics.h b/src/TextMetrics.h
index e5b32a1..92b1962 100644
--- a/src/TextMetrics.h
+++ b/src/TextMetrics.h
@@ -225,7 +225,7 @@ public:
int leftMargin(int max_width, pit_type pit) const;
/// calculates the position of a completion popup
- void completionPosAndDim(Cursor const & cur, int & x, int & y,
+ void completionPosAndDim(Cursor const & cur, int & x, int & y,
Dimension & dim) const;
private:
@@ -252,7 +252,7 @@ public:
/// our 'outermost' font.
/// This is handed down from the surrounding
/// inset through the pi/mi parameter (pi.base.font)
- /// It is used in applyOuterFont() and setCharFont() for reasons
+ /// It is used in applyOuterFont() and setCharFont() for reasons
/// that are not clear... to hand hand the outermost language and
/// also for char style apparently.
Font font_;
