Am 24.02.20 um 22:14 schrieb Paul A. Rubin:
On 2/24/20 2:51 AM, Wolfgang Engelmann wrote:
Am 22.02.20 um 20:22 schrieb Paul A. Rubin:
On 2/22/20 11:09 AM, Wolfgang Engelmann wrote:
If I use in beamer a frame with standard overlay specification and
references, instead of the second reference the first one is shown
again. Taking out the standard overlay specification is a remedy. If
I need to use the standard overlay specification, is there a way to
circumvent this?
Look at the TEST.lyx and export to pdf > the error occurs
put the standard overlay specification in a note or take it off > no
error
I use LyX Version 2.3.4
(Sonntag, 12. Januar 2020)
Systemverzeichnis: /usr/share/lyx/
Benutzerverzeichnis: ~/.lyx/
Qt-Version (Laufzeit): 5.12.5
Qt-Version (bei Erstellung): 5.12.5
Wolfgang
I tried to compile this and set a new indoor record for "cannot
determine the size of a missing graphic" errors. Can you cut this
down to a minimal example that shows the problem?
Paul
I am awful sorry that I have sent indecently not the almost minimal
file I had prepared, but somehow the original file slipped in.
Wolfgang
No worries. This appears to be a known bug in Beamer. See, for instance,
the accepted answer here
<https://tex.stackexchange.com/questions/489660/beamer-citing-distinct-works-outputs-the-same-reference-label>.
You can work around it by setting the overlay specification on the first
item rather than on the frame. See the attached LyX file, which I
modified. (I also had to change the bibliography style, since I do not
have the .bst file you are using, but that should be unrelated to the
itemization fix.)
Paul
Paul, this was very helpful, thanks for it and the attached lyx file.
Works well also with the special bst file.
Wolfgang
--
lyx-users mailing list
lyx-users@lists.lyx.org
http://lists.lyx.org/mailman/listinfo/lyx-users