I installed lyx 1.2.0 yesterday on my laptop and ran into the same problem (I also got a message that it needs xforms) and had a hard time solving it. However I managed to find an rpm that contained the libstdc++-libc6.1-2.so.3 file. Unfortunately I'm not sure where I got it from.:-( Here is a possible link
http://www.megaloman.com/~hany/RPM/doors2.4/jr/libstdc++-2.95.3-0.200003 23.i386.html Hope this helps. Regards, Daniel > -----Original Message----- > From: Tim Chapman [mailto:[EMAIL PROTECTED]] > Sent: Wednesday, June 05, 2002 4:10 PM > To: Joachim Mispel; [EMAIL PROTECTED] > Subject: Re: 1.2.0 installation problems > > > > > Joachim Mispel wrote: > > I have tried to install 1.2.0 on our local Redhat 6.2 > system with egcs > > release 1.1.2, but without luck. What can I do to install the new > > version? > > > > My problems: > > 1) When I tried to install lyx-1.2.0-1.i386.rpm, I get the message > > that libstdc++-libc6.1-2.so.3 is required > > 2) Then I tried to locate this library with rpmfind on the > redhat server, but it was not available there. > > 3) Last I downloaded the src.rpm and thried the rebuild. > Unfortunately this ended with an internal compiler error. > > > > Does anybody have an idea what else I could try? I really > would like > > to have a look at the new version - the announcements sounds really > > good! > > This is exactly the problem I have been having (see my post a > few hours > ago). Not solved it yet :( > Come to think of it, I had the same problem with 1.1.6 but > got round it > by building the src.rpm. But, as you say, for 1.2.0 that approach > doesn't work. What I don't understand is how Kayvan built the > 6.2 rpm in > the first place? > > Tim > >
