Hi,
Attached is a layout developed by Herbert Voss, which allows you to use
most of the feature of the Elseveir class. This is for lyx-120 and above.
If you are using an older version, there is a layout file compatible with
version 1.1.6. They're online at
http://www.physics.usyd.edu.au/~matthewa/lyx/, or at least were awhile
ago.
Rod
On Wed, 28 Aug 2002, Luiz Tadeu Fernandes Eleno wrote:
>
> I am writing a paper and want to follow the elsevier style. They have a
> document class called elsart.cls. What must I do if I want to use the
> elsart.cls document class?
>
> I already installed the .layout file based on article.layout, following
> the instructions on the lyx webpage, but, while running latex, it give
> three error messages, which are in fact the same one, which says
>
> \ifcase \@ptsize
>
> The
> control sequence at the end of the top line
> of
> your error message was never \def'ed. If you have
> mispelled
> it (e.g. '\hobx'), type '|' and the correc
> spelling
> (e.g. '|\hobx'). Otherwiaw just continue,
> and
> I'll forget about whatever was undefined.
>
>
> Has anyone had already this problem?
>
> Thanks,
> Luiz Eleno
> LCCMat - Computational Materials Science Lab,
> Metallurgical and Materials Engineering Dept
> Escola Politecnica da Universidade de Sao Paulo
> Sao Paulo, SP - Brazil
>
>
>
_________________________________________________________________
rod | "Beneath the waves, the waves / That's where I will be /
| I'm going to see the cow beneath the sea."
| They Might Be Giants, Lincoln
#% Do not delete the line below; configure depends on this
# \DeclareLaTeXClass[elsart]{Elsevier article style}
# Author: Rod Pinna <[EMAIL PROTECTED]>
# The Elsevier doc style also duplicates the theorem
# environments used by the AMS. The definitions here have been
# mainly taken from the amsmath.inc file, from lyx-1.0.2, by
# David L. Johnson and Jean-Marc Lasgouttes. Some modifications
# have been made.
#
# The Elsevier style *does not* implement the starred versions
# of these environments, so they are not supported by this layout.
# There are also a few AMS environments not impletemented by Elsevier,
# so they are not included either.
#
# Version 1.0 19990506 R. Pinna Inital version
# modified 2002-04-02 Herbert Voss <[EMAIL PROTECTED]>
#
# General textclass parameters
Columns 1
Sides 2
PageStyle headings
MaxCounter Counter_Subsection
ClassOptions
FontSize Default # controlled by class
End
DefaultFont
Family Roman
Series Medium
Shape Up
Size Normal
Color None
EndFont
Preamble
\providecommand{\maketitle}{}
\newcommand\beginELStitle{\begin{frontmatter}}
\newcommand\makeELStitle{\end{frontmatter}}
EndPreamble
Style Standard
LatexName dummy
LatexType Paragraph
Margin Static
ParIndent MM
ParSkip 0.4
ParSep 0.4
TopSep 1.0
BottomSep 1.0
Align Block
AlignPossible Block, Left, Right, Center
LabelType No_Label
End
Style StartTitlepage
Margin Static
LatexType Command
LatexName beginELStitle
LeftMargin xxxxxxxxxx::xx
LabelSep xx
KeepEmpty 1
Align Left
AlignPossible Left
LabelType Static
LabelString "Start Titlepage"
# label font definition
LabelFont
Series Bold
Shape Italic
Color Blue
EndFont
End
Style EndTitlepage
Margin Static
LatexType Command
LatexName makeELStitle
LeftMargin xxxxxxxxxx::xx
LabelSep xx
KeepEmpty 1
Align Left
AlignPossible Left
LabelType Static
LabelString "End Titlepage"
# label font definition
LabelFont
Series Bold
Shape Italic
Color Blue
EndFont
End
Style Keywords
LatexName keyword
LatexType Environment
Margin Static
ParIndent MM
InTitle 1
ParSkip 0.4
ParSep 0.4
TopSep 1.0
BottomSep 1.0
Align Block
AlignPossible Block, Left, Right, Center
LabelType No_Label
Font
Color blue
EndFont
End
# Load standard defs, as most of the
# Elsevier stuff seems the same.
Input stdsections.inc
Input stdstarsections.inc
Input stdlists.inc
Input stdstruct.inc
Input stdlayouts.inc
# Title style definition
Style Title
Margin Static
LatexType Command
InTitle 1
LatexName title
NextNoIndent 1
ParSkip 0.4
TopSep 1.3
BottomSep 0.7
ParSep 0.7
Align Left
# AlignPossible Left
LabelType No_Label
# Fill_Top 1
# Fill_Bottom 1
# standard font definition
Font
Family Sans
Series Bold
Size Largest
EndFont
End
# Author style definition
Style Author
Margin Static
LatexType Command
InTitle 1
LatexName author
NextNoIndent 1
ParSkip 0.4
TopSep 0.7
BottomSep 0.7
ItemSep 0
ParSep 0
Align Center
AlignPossible Center
# standard font definition
Font
Series Bold
EndFont
End
# AuthorAdress
Style AuthorAddress
Margin Static
LatexType Command
LatexName address
InTitle 1
Align Center
AlignPossible Center
Font
Size Small
Shape Italic
EndFont
End
# thanks is like a footnote
Style Thanks
Margin Static
LatexType Command
LatexName thanks
InTitle 1
Font
Size Small
Series Typewriter
Shape Italic
EndFont
End
# new Abstract style definition
Style Abstract
Margin Static
LatexType Environment
LatexName abstract
NextNoIndent 1
InTitle 1
LeftMargin MMM
RightMargin MMM
ParIndent MM
ItemSep 0
TopSep 0.7
BottomSep 0.7
ParSep 0
Align Block
AlignPossible Block
LabelType Centered_Top_Environment
LabelString Abstract
LabelBottomSep 0.5
# standard font definition
Font
Size Small
EndFont
# label font definition
LabelFont
Series Bold
Size Large
EndFont
End
# Theorm environments have been copied over from
# the amsmaths.inc file. It could not be inputfiled
# as it does some stuff which is incompatible with
# the Elsevier stlye, that is it redefines
# the theorem* environments in the preamble.
# The environments defined are :
# - Theorem
# - Corollary
# - Lemma
# - Proposition
# - Conjecture
# - Criterion
# - Algorithm
# - Definition
# - Example
# - Problem
# - Remark
# - Note
# - Claim
# - Summary
# - Acknowledgement
# - Case
# Theorem-numbered style declaration
Style Theorem
Margin First_Dynamic
LatexType Environment
LatexName thm
NextNoIndent 1
LabelSep xx
ParIndent MMM
ParSkip 0.4
ItemSep 0.2
TopSep 0.7
BottomSep 0.7
ParSep 0.3
Align Block
AlignPossible Block, Left
LabelType Static
LabelString "Theorem #."
# standard font definition
Font
Shape Italic
Size Normal
EndFont
# label font definition
LabelFont
Shape Up
Series Bold
EndFont
End
# Lemma-numbered style declaration
Style Lemma
CopyStyle Theorem
LatexName lem
LabelString "Lemma #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{lem}[thm]{Lemma} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Corollary-numbered style declaration
Style Corollary
CopyStyle Theorem
LatexName cor
LabelString "Corollary #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{cor}[thm]{Corollary} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Proposition-numbered style declaration
Style Proposition
CopyStyle Theorem
LatexName prop
LabelString "Proposition #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{prop}[thm]{Proposition} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Criterion-numbered style declaration
Style Criterion
CopyStyle Theorem
LatexName crit
LabelString "Criterion #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{crit}[thm]{Criterion} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Algorithm-numbered style declaration
Style Algorithm
CopyStyle Theorem
LatexName alg
LabelString "Algorithm #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{alg}[thm]{Algorithm} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Definition-numbered style declaration
Style Definition
CopyStyle Theorem
LatexName defn
LabelString "Definition #."
# standard font definition
Font
Shape Up
EndFont
# label font definition
LabelFont
Shape Up
Series Bold
EndFont
# Preamble
# \theoremstyle{definition}
# \newtheorem{defn}[thm]{Definition}
# EndPreamble
End
# Conjecture-numbered style declaration
Style Conjecture
CopyStyle Theorem
LatexName conj
LabelString "Conjecture #."
# Preamble
# \theoremstyle{plain}
# \newtheorem{conj}[thm]{Conjecture} %%Delete [thm] to re-start numbering
# EndPreamble
End
# Example-numbered style declaration
Style Example
CopyStyle Theorem
LatexName exmp
LabelString "Example #."
# Preamble
# \theoremstyle{definition}
# \newtheorem{exmp}[thm]{Example}
# EndPreamble
End
# Problem-numbered style declaration
Style Problem
CopyStyle Theorem
LatexName prob
LabelString "Problem #."
# Preamble
# \theoremstyle{definition}
# \newtheorem{prob}[thm]{Problem}
# EndPreamble
End
# Remark-numbered style declaration
Style Remark
CopyStyle Theorem
LatexName rem
LabelString "Remark #."
End
# Note-numbered style declaration
Style Note
CopyStyle Theorem
LatexName note
LabelString "Note #."
End
# Claim-numbered style declaration
Style Claim
CopyStyle Theorem
LatexName claim
LabelString "Claim #."
End
# Summary-numbered style declaration
Style Summary
CopyStyle Theorem
LatexName summ
LabelString "Summary #."
End
# Case-numbered style declaration
Style Case
CopyStyle Theorem
LatexName case
LabelString "Case #."
End
# Acknowledgement-numbered style declaration
#Style Acknowledgement
# CopyStyle Theorem
# LatexName ack
# LabelString "Acknowledgement #."
#
#End
# Acknowledgement style definition
# This is not taken from the AMS defs,
# so as to match the output of the
# stlye file.
Style Acknowledgement
Margin Static
LatexType environment
LatexName ack
Labeltype Top_Environment
LabelBottomsep 1
LabelString "Acknowledgement #."
parsep 0.3
LabelFont
Size large
Series Bold
EndFont
End
#LyX 1.2 created this file. For more info see http://www.lyx.org/
\lyxformat 220
\textclass elsart
\language english
\inputencoding default
\fontscheme default
\graphics default
\paperfontsize default
\spacing single
\papersize Default
\paperpackage a4
\use_geometry 0
\use_amsmath 0
\use_natbib 0
\use_numerical_citations 0
\paperorientation portrait
\secnumdepth 3
\tocdepth 3
\paragraph_separation indent
\defskip medskip
\quotes_language english
\quotes_times 2
\papercolumns 1
\papersides 2
\paperpagestyle default
\layout StartTitlepage
\layout Title
Introduction into the ELSART template
\layout Thanks
text to go as footnote to heading here
\layout Author
Rod Pinna
\layout AuthorAddress
Rod's address
\layout Thanks
First author thanks text
\layout Author
Herbert Voss
\layout AuthorAddress
Wasgenstr.
21 D-14129 Berlin
\layout Thanks
Second author thanks text
\layout Abstract
Insert Abstract HereThis publication was typeset using LATEX TEX is a trademark
of the American Mathematical SocietyCopyright cfl 1994 by Elsevier Science
Publishers B.V.
All rights reserved
\layout Keywords
Put all Keywords here in the environment
\series bold
keyword
\series default
.
For example:
\newline
Radioactivity.
(
\begin_inset Formula $\beta ^{+}$
\end_inset
,EC) [from Pt(p,
\begin_inset Formula $x$
\end_inset
n)Au or ...
\layout EndTitlepage
\layout Section
Introduction
\layout Standard
This the first section
\the_end
