On Tue, 11 Feb 2003, Herbert Voss wrote:
> Christian Ridderstr�m schrieb:
> >
> > Does anyone have an idea how I can set the pagestyle to empty for the page
> > that a specific float ends up on? (The float is big and the
> > footers/headers interfere with it).
> >
> > I've tried putting \thispagestyle{empty} inside the float, but with no
> > luck. Should I temporarily redefine some command or something?
>
Thanks, I've tested both ways and they work (I also put some notes here,
in case others are interested)
http://ev-en.org/wiki/moin.cgi/LyxUnfloatingFigureOnEmptyPage
There is a minor problem though. The figures are not centered vertically
on the page, instead it's placed at the top, starting (I guess) where
text would normally start.
For a really big picture this can look ugly, since you're just leaving the
header-space alone.
I tried adding \vspace{-1cm} and \vfill at different places but it still
starts at the same space.
I've also tested using \setlength{\headheight}{0cm} and that moves the
figure higher up to the page, with the drawback that you have to remember
to set the \headheight to whatever it was before you used it. It also
requires a bit of manual fiddling to make it look nice. I'll try and
also set \headsep etc to zero and then try \vfill to see if that improves
things.
/Christian
>
>
>
--
Christian Ridderstr�m, +46-8-790 91 37 http://www.md.kth.se/~chr
Mechatronics lab, Dept. of Machine Design http://www.md.kth.se
