Hi list
I'm writing on my thesis and recognize the problem. The labeling is a bit
of a problem. Not only one have to find a good name that describes the
label, but also when inserting the label one have to find it in a list of
maybe several hundreds.
I find when writing that a common procedure is to first create a label and
in the next moment inserting it. Also when creating labels they often
comes in groups so I usually select labels from the same part of the list
in a sequence.
So I have a feauture request
There should be a preselected labels in the label selection dialog.
The preselection shoule be changed by:
Making a new label.
Selecting a label.
I would also like to have a command that directly inserts the label that
is preselected without having to open the dialog.
Then I must say that the Enter in the label selection dialog should be
connected to OK and not "Goto" (ver 1.3.5-qt). Maybe a "Insert" button
would be good so that the dialog could stay open.
Comments?
/johan
On Wed, 26 Jan 2005, Angus Leeming wrote:
> Matej Cepl wrote:
> > Rich Shepard wrote:
> >> They can be referenced as
> >> "... as seen in the following figure."
>
> > This is not a wise solution, because floats are floats because they can
> > float, i.e., "following" figure may actually get before its reference
> > (AFAIK).
>
> Indeed. That's what the prettyref package (and other similar packages) is
> designed to deal with. Try the different "Format" options of the cross
> reference dialog.
>
>
--
Johan Ingvast, PhD student http://www.md.kth.se/~ingvast
Department of Machine Design, Royal Institute of Technology, Sweden
http://www.md.kth.se, http://www.md.kth.se/~cas <--- Walking robot proj
tel +46 (0)8 790 95 36 mob. +46 (0)70 34 34 498
