Hey Kurt, Well, once the port to T200 is done, relocating the code to a new location is a simple matter of changing the "org" address.
Ken On Wed, Apr 8, 2015 at 10:10 AM, Kurt McCullum <[email protected]> wrote: > Thanks for the update Ken, > > One question about the ROM versions of NewDos. I noticed on the versions > you have in your memfiles area that the code has been relocated to a lower > portion of the ROM. How difficult is it to relocate optrom code to a new > location? The original versions started at 3535h. > > I ask because I have been working on merging TWord/Sardine with TS-DOS as > one ROM image (Excluding the internal dictionary). I've found the location > of the F7 call from the TWord main menu (1C28) and was planning to call > TS-DOS from there but 3535h is about 36 bytes too low to work. > > Kurt > > > > On Wednesday, April 8, 2015 9:54 AM, Ken Pettit <[email protected]> > wrote: > > > Almost. > > Bob Pigford did some work on getting the NEWDOS assembly code ported over > with T200 System ROM addresses and got it about 90-95% there I would > guess. But additional work is still needed to get it to a working state. > > Ken > > On Wed, Apr 8, 2015 at 9:39 AM, Kurt McCullum <[email protected]> > wrote: > > Does NewDOS exist for the 200? > > Kurt > > > > >
