I'd be happy to burn them for you but unfortunately shipping from Canada would probably be more than $8.90...
BTW, there's also a patch for the M100 (don't know if it applies to yours) that fixes a small error in the Trig constants; some people also prefer the Pi symbol to the vertical bar as in the 102, and I personally prefer to set the default Telcom stat to 19200bd RS232 instead of the 300bd modem. And of course if you're handy you can add a socket with a couple of diodes and a resistor and use a '512 instead of the '256 to add an Option ROM while you're at it (e.g. TS-DOS). m ----- Original Message ----- From: James Zeun To: Model 100 Discussion Sent: Monday, May 04, 2015 2:57 PM Subject: Re: [M100] new EU M100 main ROM / REX compatibility. Kurt thats actually a lot cheaper then I expected! Would you mind if I emailed you about how to go about getting some roms written? On 4 May 2015 at 19:36, Kurt McCullum <[email protected]> wrote: $8.90 US. I don't have the exact breakdown but I bought two 27C256 EPROMS for I think $0.95. And then I paid another $0.50 to have them burned. Shipping was more than the EPROMS at $6.00. All prices in US dollars by the way. The only changes I made to the ROM image were the Y2k patch and I personalized it in the upper right hand corner of the menu by replacing (c) Microsoft with my own message. Certainly nothing life changing to the machine but I wanted to try it and the whole process was simple. I do wish my 102 had a socket so I could do the same thing without desoldering the EPROM. Kurt On 5/4/2015 10:33 AM, James Zeun wrote: Kurt, how much did that cost? I can't afford to spend an awful lot more after buying the Rex. I'm not sure but I think Stephen was thinking of sending me a rom. But he's looking at the ROM I sent him at the moment. I'd personally just like it to work, so I can get back to using my M100 :-) James On 4 May 2015 6:29 pm, "Kurt McCullum" <[email protected]> wrote: You could get a new EPROM burned and just drop it in to replace the one that's in there now. Plus fix theY2K issue at the same time. buyicnow.com is a really inexpensive way to go. I had two 32k EPROMS made for my T200. It took about a week to get them but they were programmed with the image I sent and worked perfectly. Kurt On Monday, May 4, 2015 10:16 AM, James Zeun <[email protected]> wrote: I'd love to post you my M100, but its far to delicate/precious to entrust with the postman. Plus I use it for writing :-P On 4 May 2015 3:28 pm, "Stephen Adolph" <[email protected]> wrote: In theory yes, but the hardware compatibility item is very important. Since all roms run in VT, we might assume that they are compatible. the exception is the lack of modem in the EU machines. I thinking to send James an EEPROM with the other EU ROM that is compatible with REX. But, I want to do some testing here to confirm it. I would prefer to have the target hardware in front of me though.. Otherwise I am just guessing. Steve On Mon, May 4, 2015 at 10:22 AM, Gary L Phillips <[email protected]> wrote: Just out of curiosity then, does that mean that by installing the main ROM replacement fix REX would run on the machine? I suppose it depends on whether there are actual hardware differences as well? On Mon, May 4, 2015 at 8:03 AM, James Zeun <[email protected]> wrote: > Gee wiz I do love Bill for that! :-P > > On 4 May 2015 1:52 pm, "Stephen Adolph" <[email protected]> wrote: >> >> comparing this "new rom" to the original and my other EU rom on file, it >> is so different that I suspect Bill Gates decided to kill the option rom >> business in EU and keep the price high on M100 to sell Multiplan. >> >> >> On Mon, May 4, 2015 at 8:15 AM, Stephen Adolph <[email protected]> >> wrote: >>> >>> James was able to extract his Main ROM from his M100 with the late main >>> board. >>> Turns out that ROM is quite different. >>> * it is different from the usual M100/T102 main ROM >>> * it is also different from the other EU main ROM I have >>> >>> Checksum is EEA4. >>> >>> This ROM image runs in VT, but not with REX. So, there must be some >>> calls locations that have changed in the main ROM that affect REX. >>> >>> ..Steve >> >> > -- My retro tech blog and general ramblings http://bytemyvdu.wordpress.com/
