I'm using minicom under ubuntu with a bought null modem (dual head) cable attached to a Lenovo X220 via a USB adapter. I needed to use a gender changer at the 100 end. I do have an X60 with real serial ports, I could make up a short screened cable if you think that would help.
Thanks, Mark On 21 May 2015 00:37, "MikeS" <[email protected]> wrote: > Serial file transfer should work up to 19,200 baud > with no problems. What are you using at the other > end (software, OS, USB or 'real' serial port, > etc.)? > > The M100 needs to use XON/XOFF handshaking, NOT > 'hardware' handshaking! > > A simple three-wire cable is enough if you're just using terminal > programs; since it works at 1200 bd the cable is probably OK. > > Internal BT installation: > https://www.flickr.com/photos/ehgradman/sets/72157603124164552/ > > External BT adapter available from one of the > members or through the Club100 site; best to ask > here if interested, both about that and the REX. > > m > > ----- Original Message ----- From: "Mark Wickens" < > [email protected]> > To: "M 100" <[email protected]> > Sent: Wednesday, May 20, 2015 5:51 PM > Subject: [M100] Club 100 Online Ordering and > bluetooth question > > > Hi >> >> Just a quick question, and an introduction - >> I've been looking for a Model 100/102 for ages >> in decent condition and was fortunate enough to >> pick one up in the UK recently - as it happens >> it was being sold by a charity in Kendal which >> is only 20 minutes from where I live. >> >> My questions are: >> >> 1. Is the club100 ordering page still active? >> I'm toying with the idea of ordering a Rex. >> 2. Does anyone have any experience/has anyone >> implemented an internal bluetooth serial adapter >> for the 100/102? I'm strugging to get my current >> serial lead to work above around 1200 baud. I >> can try a new cable, but I'd rather go wireless >> if that is possible and reliable. >> >> Many thanks, Mark. >> > >
