I bought some of the M100ROM PCBs thinking they would be usable in the
Model 102 but it would appear I am mistaken.
The PCB as documented here:
http://bitchin100.com/wiki/index.php?title=M100ROM
I built up the PCB last night with a 32K 27C256 EPROM programmed with
ROM2 (using the 'new' holes) and found two things:
1. It doesn't fit flush enough to close the door.
2. When I turned the 102 on I got a blank screen.
I cut the trace as instructed for the 27C256, but later the instructions
seemed to be a little contradictory as to whether a 27C256 was supported
as an option ROM only.
Am I right in thinking that the PCB isn't supported in the Model 102? If
that's the case do I have an option to use 'real' EPROMS (as opposed to
REX) in the Model 102? Does anyone know if the PCB will work in the 200?
I also remember reading that there was a new, expanded capacity REX in
the pipeline. Is that available yet? I may take the easy route yet :)
Thanks for the help,
Mark.
