Bingo.... the TDD makes noise, so I thought the disk was turning... but it is not. Looks like I may need a new belt! Thanks!
On Wed, Jul 22, 2015 at 9:23 AM, ultimate quantifier <[email protected]> wrote: > floppy disks have a metal center ring with a notch. if you note the > position of the notch and try to use it in the drive, then take it out, the > position of the notch should change indicating that the drive is moving the > disk at least. this may help you to figure out if the belt is suspect. > > > Date: Wed, 22 Jul 2015 09:09:58 -0700 > > From: [email protected] > > To: [email protected] > > Subject: Re: [M100] TS-DOS "Not Found" > > > > > > > > Ken at club100 may be able to get one to you but I think he is a bit > busy with work right now. > > Do you have a cassette cable? > > I could save the dos100.co file as an mp3 file that you could use to > load ts-dos. Then you could format a new disk with it and save dos100 to > the disk. A bit of a pain but it might get you up and running. > > > > Kurt > > > > > > ------------------------------ > > On Wed, Jul 22, 2015 7:49 AM PDT Barry Rands wrote: > > > > >No DIP switches on the TDD2. Drive is spinning, so diskette may be bad. > Any > > >way to get a new disk? > > > > > >On Wed, Jul 22, 2015 at 7:21 AM, Kurt McCullum <[email protected]> > > >wrote: > > > > > >> The disk could be bad or the drive itself might be bad. If the drive > > >> isn't spinning check the drive belt. It may be broken. Club100 should > have > > >> spares. > > >> > > >> Kurt > > >> > > >> > > >> On 7/22/2015 7:07 AM, Barry Rands wrote: > > >> > > >> Thanks for the response. I do have the original TS-DOS diskette in the > > >> drive. Could it be that the diskette is so old that the file has > become > > >> corrupted with age? > > >> > > >> On Wed, Jul 22, 2015 at 6:29 AM, <[email protected]> wrote: > > >> > > >> TS-DOS is not built into the URII, only a loader program. TS-DOS must > > >> be on your TPD disk before it can be loaded. > > >> > > >> Sent by Outlook <http://taps.io/outlookmobile> for Android > > >> > > >> > > >> > > >> On Wed, Jul 22, 2015 at 6:21 AM -0700, "Barry Rands" < > [email protected]> > > >> wrote: > > >> > > >> I just resurrected my Model 102 from storage and am trying to get > > >> everything running. It has the UR-II ROM with TS-DOS built in, but > when I > > >> connect the TDD2, all I get is "Not Found" when I enter the TS-DOS > program. > > >> Any ideas of what might be wrong? > > >> > > >> -- > > >> Barry Rands, PE, LEED AP > > >> 81 Encanto Lane > > >> San Luis Obispo, CA 93401 > > >> 805-704-1549 (cell) > > >> 805-783-2038 (home) > > >> > > >> > > >> > > >> > > >> -- > > >> Barry Rands, PE, LEED AP > > >> 81 Encanto Lane > > >> San Luis Obispo, CA 93401 > > >> 805-704-1549 (cell) > > >> 805-783-2038 (home) > > >> > > >> > > >> > > > > > > > > >-- > > >Barry Rands, PE, LEED AP > > >81 Encanto Lane > > >San Luis Obispo, CA 93401 > > >805-704-1549 (cell) > > >805-783-2038 (home) > > > -- Barry Rands, PE, LEED AP 81 Encanto Lane San Luis Obispo, CA 93401 805-704-1549 (cell) 805-783-2038 (home)
