I no longer remember the magic brain wipe key sequence. Esc, Break & Reset?
Can you remind me. On Mon, Jul 27, 2015 at 9:08 PM, Stephen Adolph <[email protected]> wrote: > Power off, 5 second, power on > Cold restart > Call 63012 > > ( are you familiar with the magic brain wipe key sequence? ;) > > Can't explain why what you did below did not work except that somehow REX > did not reset to default ROM. Power cycle should do that. > > Unless somehow you overwrote rexmgr with intsol in the default block. > Maybe that happened? Haven't seen that before though. > > If you can't make progress, try reloading release 4.9. > > > Steve > > On Monday, July 27, 2015, Keith Johnson <[email protected]> wrote: > > Hi Steve, > > > > I did try that already. But one more shot any way. > > > > Same result. Intsol is the only thing loaded into memory. > > > > Thank you > > Keith > > > > On Mon, Jul 27, 2015 at 8:21 PM, Stephen Adolph <[email protected]> > wrote: > >> > >> Power off, power on, call63012. > >> > >> Looks like intsol is no longer compatible with rexmgr. > >> > >> Steve > >> > >> On Monday, July 27, 2015, Keith Johnson <[email protected]> wrote: > >> > This is probably a simple question.... I hope. > >> > > >> > I recently updated my REX to firmware 4.9. The upgrade went fine. I > started loading opt roms back up. Testing as I go. > >> > > >> > I get to a opt rom call IS100.BX. I load it up test it out and try to > run it. > >> > > >> > Tells me I need to "Clear '0,60200' " to get it to run. I do that, it > runs everything is great. > >> > > >> > Go back to the menu, I don't remember what happens next but basically > I end up with a cold boot. Memory is clear, REX Manager is gone. > >> > > >> > I drop to BASIC type "Run 63012" which only loads INTSOL. > >> > > >> > No Rex manager... > >> > > >> > How do I get Rex Manager back? > >> > > >> > Thank you ahead of time. > >> > > >> > Keith > >> > > > >
