No! I can't remember it without an M100 in front of me.
Memory power switch off for 1 min also works.
Someone must 'know'.
Steve

On Monday, July 27, 2015, Keith Johnson <[email protected]> wrote:
> I no longer remember the magic brain wipe key sequence.
>
> Esc, Break & Reset?
>
> Can you remind me.
>
>
> On Mon, Jul 27, 2015 at 9:08 PM, Stephen Adolph <[email protected]>
wrote:
>>
>> Power off, 5 second, power on
>> Cold restart
>> Call 63012
>>
>> ( are you familiar with the magic brain wipe key sequence? ;)
>>
>> Can't explain why what you did below did not work except that somehow
REX did not reset to default ROM. Power cycle should do that.
>>
>> Unless somehow you overwrote rexmgr with intsol in the default block.
>> Maybe that happened? Haven't seen that before though.
>>
>> If you can't make progress, try reloading release 4.9.
>>
>> Steve
>>
>> On Monday, July 27, 2015, Keith Johnson <[email protected]> wrote:
>> > Hi Steve,
>> >
>> > I did try that already. But one more shot any way.
>> >
>> > Same result. Intsol is the only thing loaded into memory.
>> >
>> > Thank you
>> > Keith
>> >
>> > On Mon, Jul 27, 2015 at 8:21 PM, Stephen Adolph <[email protected]>
wrote:
>> >>
>> >> Power off, power on, call63012.
>> >>
>> >> Looks like intsol is no longer compatible with rexmgr.
>> >>
>> >> Steve
>> >>
>> >> On Monday, July 27, 2015, Keith Johnson <[email protected]> wrote:
>> >> > This is probably a simple question.... I hope.
>> >> >
>> >> > I recently updated my REX to firmware 4.9. The upgrade went fine. I
started loading opt roms back up.  Testing as I go.
>> >> >
>> >> > I get to a opt rom call IS100.BX. I load it up test it out and try
to run it.
>> >> >
>> >> > Tells me I need to "Clear '0,60200' " to get it to run. I do that,
it runs everything is great.
>> >> >
>> >> > Go back to the menu, I don't remember what happens next but
basically I end up with a cold boot. Memory is clear, REX Manager is gone.
>> >> >
>> >> > I drop to BASIC type "Run 63012" which only loads INTSOL.
>> >> >
>> >> > No Rex manager...
>> >> >
>> >> > How do I get Rex Manager back?
>> >> >
>> >> > Thank you ahead of time.
>> >> >
>> >> > Keith
>> >> >
>> >
>

Reply via email to