Steve, I don't know. I tried it again today.
I load up IntSol. Shut the main power switch off clearing all the Ram. I "call 63012" to have IntSol appear. Click IntSol and it loads up IntSol. I then hit crtl + reset +break then cycle the main power switch. "call 63012" and same result as above. Lastly before I left for work this morning. I turned off the memory switch. 9-10 hours later I get home. Turn the switch back on.... "call 63012" IntSol starts up. Please know, I'm not trying to argue. I'm just explaining what I'm experiencing. I think REX is one of greatest things I've ever used. It is amazing. Once I reflash my REX again I'm deleting IntSol from my NADSbox. Keith On Wed, Jul 29, 2015 at 6:45 AM, Stephen Adolph <[email protected]> wrote: > Keith, > That doesn't quite ring true with me so I will try it. You should not have > to reflash rex. > Everything you say sounds plausible until that last point- needing to > reflash to recover. > Otherwise I can see conflicts potentially with file names and directory > entries. That can happen. But not overwriting the base image in Rex. > > Power cycling after a cold boot should guarantee your abiity to 'call > 63012' and reinstall Rex manager. > > Steve > > > On Tuesday, July 28, 2015, Keith Johnson <[email protected]> wrote: > > Well I did a bunch of testing, as promised. I don't know if it is a > fault with my M102 or a bad image. This is the results of my testing. > > > > IntSol works fine so long as I don't leave it as the active optrom when > I shut the computer off. > > > > IntSol doesn't create a entry on the menu (Yesterday I thought it was). > The only way to start it is open Rexmanager, and activate the ROM in REX. > It runs as normal. I can play around, switch back to TS-DOS or SuperRom and > then shut the machine off... no problems. > > > > If IntSol is the active ROM (again no menu entry) and I shut the machine > off. When I turn it on... all my files are gone. REX manager disappears and > then becomes IntSol. At which point I can only start IntSol and I have to > reflash the REX as I did yesterday. > > > > I see on the OptRom zip file on the wiki, that IntSol was updated? I'm > not sure if I have the most up to date ROM image. I think my images are > from when REX was first release to the public. > > > > I'm not really worried about this one ROM image. I haven't really touch > my M102 in a while and I was just playing around. > > > > I just figured I would report what I found... in case anyone else uses > IntSol. If it helps great, if not I won't clog up the mailing list. > > > > Again many thanks > > Keith > > > > On Tue, Jul 28, 2015 at 12:08 AM, Willard Goosey <[email protected]> wrote: > >> > >> On Mon, Jul 27, 2015 at 10:25:38PM -0400, Keith Johnson wrote: > >> > Tomorrow I will test out intsol again. See if I can duplicate the > issue. At > >> > least I didn't kill my REX. I'll report back in case you are > interested. > >> > >> I briefly tried IntSol when I got my REX (4.8). It worked then, but > >> didn't impress me. > >> > >> Willard > >> -- > >> Willard Goosey [email protected] > >> Socorro, New Mexico, USA > >> I search my heart and find Cimmeria, land of Darkness and the Night. > >> -- R.E. Howard > > > > >
