I believe you; but it is not planned or expected...will have to investgate...
On Thursday, July 30, 2015, Keith Johnson <[email protected]> wrote: > Steve, > > I don't know. I tried it again today. > > I load up IntSol. Shut the main power switch off clearing all the Ram. I "call 63012" to have IntSol appear. Click IntSol and it loads up IntSol. > > I then hit crtl + reset +break then cycle the main power switch. "call 63012" and same result as above. > > Lastly before I left for work this morning. I turned off the memory switch. 9-10 hours later I get home. Turn the switch back on.... "call 63012" IntSol starts up. > > Please know, I'm not trying to argue. I'm just explaining what I'm experiencing. I think REX is one of greatest things I've ever used. It is amazing. > > Once I reflash my REX again I'm deleting IntSol from my NADSbox. > > Keith > > On Wed, Jul 29, 2015 at 6:45 AM, Stephen Adolph <[email protected]> wrote: >> >> Keith, >> That doesn't quite ring true with me so I will try it. You should not have to reflash rex. >> Everything you say sounds plausible until that last point- needing to reflash to recover. >> Otherwise I can see conflicts potentially with file names and directory entries. That can happen. But not overwriting the base image in Rex. >> >> Power cycling after a cold boot should guarantee your abiity to 'call 63012' and reinstall Rex manager. >> >> Steve >> >> On Tuesday, July 28, 2015, Keith Johnson <[email protected]> wrote: >> > Well I did a bunch of testing, as promised. I don't know if it is a fault with my M102 or a bad image. This is the results of my testing. >> > >> > IntSol works fine so long as I don't leave it as the active optrom when I shut the computer off. >> > >> > IntSol doesn't create a entry on the menu (Yesterday I thought it was). The only way to start it is open Rexmanager, and activate the ROM in REX. It runs as normal. I can play around, switch back to TS-DOS or SuperRom and then shut the machine off... no problems. >> > >> > If IntSol is the active ROM (again no menu entry) and I shut the machine off. When I turn it on... all my files are gone. REX manager disappears and then becomes IntSol. At which point I can only start IntSol and I have to reflash the REX as I did yesterday. >> > >> > I see on the OptRom zip file on the wiki, that IntSol was updated? I'm not sure if I have the most up to date ROM image. I think my images are from when REX was first release to the public. >> > >> > I'm not really worried about this one ROM image. I haven't really touch my M102 in a while and I was just playing around. >> > >> > I just figured I would report what I found... in case anyone else uses IntSol. If it helps great, if not I won't clog up the mailing list. >> > >> > Again many thanks >> > Keith >> > >> > On Tue, Jul 28, 2015 at 12:08 AM, Willard Goosey <[email protected]> wrote: >> >> >> >> On Mon, Jul 27, 2015 at 10:25:38PM -0400, Keith Johnson wrote: >> >> > Tomorrow I will test out intsol again. See if I can duplicate the issue. At >> >> > least I didn't kill my REX. I'll report back in case you are interested. >> >> >> >> I briefly tried IntSol when I got my REX (4.8). It worked then, but >> >> didn't impress me. >> >> >> >> Willard >> >> -- >> >> Willard Goosey [email protected] >> >> Socorro, New Mexico, USA >> >> I search my heart and find Cimmeria, land of Darkness and the Night. >> >> -- R.E. Howard >> > >> > >
