That's useful, and I must confess I was looking at the wrong part of the schematic! ;)
I suspected that it must not be a straight through cable, because that would be too easy. From his description it sounds like he ran across three transistors, SOT-23 packages I'm guessing. According to a cross reference most likely a PNP transistor with two built-in resistors, similar to what is shown in the schematic on those same lines. I'll have to try and construct a cable, but the next hurdle is that I have no disks! On Tue, Jan 12, 2016 at 8:53 AM, Christopher Fox <[email protected]> wrote: > Here’s a document from Marty Goodman on the subject: > > http://ratthing.com/club100/tpdd.do > > christopher > > > > > > On 20160112, 00:10, "M100 on behalf of Geoff Oltmans" < > [email protected] on behalf of [email protected]> wrote: > > >Does anyone have the pinout for the data cable? The schematic isn't clear > what pin is what apart from the grounds. > > > >Thanks, > > > >Geoff > > >
