Hi Kurt, As I recall the TPDD uses one baud rate for setup but another baud rate for normal operation -- I don't remember which one is which but setting the switches on the physical TPDD switched the baud rate.
Cheers, Bert -------- Original message -------- From: Kurt McCullum <[email protected]> Date:01/25/2016 13:41 (GMT-06:00) To: Model 100 Discussion <[email protected]> Cc: Subject: [M100] TS-DOS at 9600 As I work with the TPDD for the Android I'm running into a speed problem. A question for those of you who have spent far more time tinkering with the TPDD protocol that I have. Under what circumstances does TS-DOS drop down to 9600 baud. In testing I found that I can't run in debug mode at 19200 baud but I can at 9600 baud. However, not everything works properly at the lower speed. So I'm wondering how to fake out TS-DOS to make it switch to 9600 baud. Kurt
