Thanks Bert, that makes sense. I think I found where the baud rate is set in
the RAM versions and I can tweak that to 9600 until I get all the testing done.
Kurt
On Monday, January 25, 2016 12:09 PM, Bert Put <[email protected]> wrote:
Hi Kurt,
As I recall the TPDD uses one baud rate for setup but another baud rate for
normal operation -- I don't remember which one is which but setting the
switches on the physical TPDD switched the baud rate.
Cheers, Bert
-------- Original message --------
From: Kurt McCullum <[email protected]>
Date:01/25/2016 13:41 (GMT-06:00)
To: Model 100 Discussion <[email protected]>
Cc:
Subject: [M100] TS-DOS at 9600
As I work with the TPDD for the Android I'm running into a speed
problem. A question for those of you who have spent far more time
tinkering with the TPDD protocol that I have. Under what circumstances
does TS-DOS drop down to 9600 baud. In testing I found that I can't run
in debug mode at 19200 baud but I can at 9600 baud. However, not
everything works properly at the lower speed. So I'm wondering how to
fake out TS-DOS to make it switch to 9600 baud.
Kurt
