Eddie,
Yes to all three questions. Loading option ROMs is fairly straight
forward. You can set up the serial port by going to peripheral setup.
There is also a capture mode under peripheral devices which will log all
the serial traffic in and out of Virtual-T.
Kurt
On 4/10/2016 2:13 PM, eddie edwards wrote:
Hello group. I have some questions about virtual t and was wondering
if anyone had enough experience to answer them.
1. can you load a rom image into virtual t ?
2. can virtual t talk to a tpdd using a serial port on the computer
that is running virtual t?
3. is it possible to capture the information going past the serial
port to a log file on the newer pc?
what i am trying to do is analyze all information coming back and
forth between the tpdd and the virtual m100. and yes, i already know
this has been done another way and the information is available about
the tpdd codes. I would just like to try the process to gathering the
information myself using virtual t.
thank you for any information that can be provided.
