I don't have a link handy because I bought my solution in Australia, but I use a 6V lantern battery in a battery case which has a two-conductor wire which terminates in a barrel connector with the correct polarity for the M-100. There's also a push button power switch on top of the battery frame.
Hope that helps... Cheers/73 Bert/KG4BEC On 04/18/2016 11:45 PM, Bogdan Macri wrote: > > FWIW, I use this: > > > http://www.amazon.com/Velleman-PSSMV1USA-3-12Vdc-Switching-Supply/dp/B00068U44I/ref=sr_1_5?ie=UTF8&qid=1461040993&sr=8-5&keywords=multi+voltage+power+adapter > > > > I have several of them and they work fine at 6V. You can also reverse > polarity and have the (+) on the outside, as required by the Tandy > portables and the TPDD1/2. > > > > Yes, the TPDD1/2 uses the same power adapter as the M100/T102. > > > > > > *From:*M100 [mailto:[email protected]] *On Behalf Of > *James Zeun > *Sent:* Sunday, April 17, 2016 17:34 > *To:* Model 100 Discussion <[email protected]> > *Subject:* [M100] General PSU question > > > > > So I now have a TPDD2 and I'm using a lot of AA batteries. Looking at > the M100 and the disk drive. It appears both could use the same PSU. > > I've looked on evilbay and found something that might do the trick. > But I was curious, does the Club100 stock an official m100 power supply? >
