Kurt, regarding the need for hardware flow control; if the user is just running TPDD protocol, I did not think any flow control was needed. the max packet size is 128 bytes I think and the M100 can deal with that at 19200 baud. What did you see? Steve
On Thu, Jun 30, 2016 at 3:25 PM, Kurt McCullum <[email protected]> wrote: > I'm late on this thread but I'll put in my two cents. Yes, mComm will work > over bluetooth. The problem is TS-DOS. Without additional delays, it > times-out. And on top of that the hardware must support RST/CTS. When I was > working on the bluetooth code for mComm, I used an off the shelf RS232 to > Bluetooth device which had CTS/RTS flow control built in. After many hours > of frustration, I found that if I changed the delay values in TS-DOS, it > worked reliably, but definitely slower. I posted some REX images of TS-DOS > with delays added in the members file area for those interested in testing. > I stress 'testing' as its still in that phase. Steve did some testing with > BlueM but he had some issues as I recall. > I have not done much with it over the past two months. There seems to be > several variables between the hardware and TS-DOS. I decided to stick with > a wired connection until I have time to pick it up again. > > Kurt > > > On Thursday, June 30, 2016 11:49 AM, Chris Ratcliffe <[email protected]> > wrote: > > > Apologies - I see it does use bluetooth. > > > [image: theguild] <http://www.theguild.tv/> > Chris Ratcliffe / Animation / Graphics / Creative Code > 44 (0) 7973 299 138 / [email protected] > THE GUILD TV LTD / http://www.theguild.tv > > On 30 June 2016 at 17:45, John R. Hogerhuis <[email protected]> wrote: > > You don't need GetBlue if you are using mcomm for android. > > I think you need Rex or some way to run a customized tsdos optrom though. > > On Thursday, June 30, 2016, Hiraghm <[email protected]> wrote: > > I just purchased the GetBlue app to connect my Model 100 to my Note 5 > Android phone. > I downloaded mcomm for android... is that enough by itself to use my phone > as storage for my M100? > Is there a guide somewhere on how to set up GetBlue / mcomm ? > > > > >
