The most recent version 1.41, supports serial and Bluetooth connections. I have not tested it with BlueM. I tested with an off the shelf Bluetooth to rs232 device. The problem is with TS-DOS. There is too much delay with a Bluetooth connection and so TS-DOS times out.
I ended up tweaking a RAM version of TS-DOS and adding delays to it. On my 200 it worked perfectly but definitely slower than a wired connection. I carried those changes over to the ROM versions of TS-DOS that are in the members file area under my name. They have not been tested. Steve did some limited testing with BlueM but I don't think he had satisfactory results. Perhaps he will comment. To try it, you have to first create a Bluetooth link between your phone and the Bluetooth device. Then start mComm. The little serial cable icon is a button. If you press it, mComm will switch to Bluetooth mode and the icon becomes a Bluetooth symbol. Then when you press the "Start TPDD service" button, it will ask you which Bluetooth connection you want to use. One thing I did notice is that TS-DOS needs to be running before you start the Bluetooth connection or it errors out for some reason. There is a lot of testing and debugging to be done on the Bluetooth side. Kurt -----Original Message----- From: M100 [mailto:[email protected]] On Behalf Of Jim Williams Sent: Friday, September 09, 2016 5:59 PM To: [email protected] Subject: Re: [M100] Getting started with mComm Am I mistaken, or was there a version of mcomm designed to work with the BlueM bluetooth serial adapter?
