I looked at that already, the Brother M1009 has both a Centronix port
and a serial port, as well as 2 sets of 8 position dip switches. The
NLQ401 only has one 8 position dip switch, only a Centronix port, and
different firmware, so the dip switch positions do not match what I have.
The printer and PCB is the same though, just the NLQ410 has a few less
components and the firmware is changed.
On 3/15/2017 2:50 AM, Brian White wrote:
http://www.cpcwiki.eu/index.php/NLQ401#Brother_M1009
Looks like you should be able to deduce from the german manual for
another printer that has the same guts.
--
bkw
On Mar 14, 2017 11:35 PM, <[email protected]
<mailto:[email protected]>> wrote:
I have a Brother M-1009 dot matrix printer for my Tandy 200, but
no manual for it. I've tried my best google-fu, but can't dig up
anything but long dad links. Would anybody have any info on the
dip switch settings for this printer?
Thanks!
Darren
