Yes, it’s certainly possible. You will need one of the text formatting programs to make it look right. There are several on the Club100 website. Probably the best text formatter is T-Word by Traveling software. It is included with the Ultimate Rom, The Sardine Rom, and The SARDOS Rom.
The printer cable is a ribbon cable that connects on the back of the Model-T. One end is an IDC connector and the other end is a Centronics connector. If you get the press fittings then it’s a simple matter of using pins 1 through 26 on both connectors. It’s a straight through cable. Kurt From: M100 [mailto:[email protected]] On Behalf Of user evers Sent: Monday, June 26, 2017 6:56 PM To: [email protected] Subject: [M100] m102 printing ... Panasonic 24pin printers? All, Would it be possible to use my m102 with an old Panasonic 24 pin printer if it supports Epson ESC/P2 printing emulation? I have an old printer cable that has a bad connector on it, but, was interested if the cable pin-outs are posted some where. Thanks in advance!
