I have not had much luck using an external TPDD emulator with VT. I suspect
it's mainly due to the timing issues in TS-DOS. Try using the emulator that is
built in to VT. That will work well.
On Thursday, September 21, 2017 11:01 AM, Josh Malone
<[email protected]> wrote:
Okay - that works (in VT at least). I have something reporting itself as
TS-DOS (100 v4.10).
Now I'm trying to get TS-DOS to read a file form laddiealpha. When I start
"TS-DOS.BA" I get a menu, from which I select "Disk". Then laddiealpha displays
some hex and TS-DOS on VT seems to hang.
Opening com7
G:4D 31 0D
G:0D 0D 4D 31
G:0D
G:E6 98 06 0F
G:E6 80 98 66
G:CC E6 80 80
G:00 7E FF E6
G:80 E6 80 E6
G:98 06 0F E6
G:80 98 E6 98
G:66 3F 80 00
-Josh
On Thu, Sep 21, 2017 at 12:51 PM, Kurt McCullum <[email protected]> wrote:
Guys,
Version 2 of mComm is still a work in process but I'm adding the ability to
load CO files directly. Attached is what it kicks out when a request to load
DOS100.CO is sent. You can use the attached file with any terminal program, or
mComm for WIndows to load TS-DOS.
>From a terminal program, you would go into BASIC and type RUN "COM:98N1e" and
>then send the file as ASCII text from the terminal program. Follow the
>instructions to save when it's done running.
With mComm for Windows, from TELCOM, highlight the file and press D for
download. The prompt comes up. Press F8 to exit TELCOM. Go into BASIC. Type
RUN"COM:98N1e" and it will load. Again, remember to follow the instructions at
the end.
I hope to get the new mComm out soon but there is quite a bit left to do. But
since I've been working on this and people are asking, this is a temporary fix
until everything is finished.
Kurt
