A T200 with a clean memory should show around 19K per bank, if they are fully populated. Part of the 24K is taken up by the system so it is not all available for the user. Just a thought have you tried to power on while holding ctrl-break to make sure nothing has been left in memory from some other operation? This should do a memory clean boot.
Does it show the same on the other two banks? If you only have ~5K then I would guess two of the RAM chips are possibly ³bad" the working 8K would be shared with the system. On 18/10/17, 2:38 PM, "M100 on behalf of John Watson" <[email protected] on behalf of [email protected]> wrote: >I just noticed this evening that my M200 is only showing approx 5000 >bytes free with nothing in memory (can't remember exact figure as it's >now open). I thought it was supposed to have 24K but could be wrong. > >The memory board has 3 x HM6264LP modules. Are they all used and is it >possible one or more could be bad?
