great. wish there was a better solution for the pins. maybe those edge pins that clip on. I've never been able to pull the pins out of the plastic. I use a pair of clippers to cut across the plastic and weaken it, and eventually get it off. Real pain.
On Fri, Nov 3, 2017 at 2:05 AM, Brian White <[email protected]> wrote: > I just built one of your model 200 ram boards Steven, and it worked. > > As we already talked about, > the pins were tedious to do but at least I found a reasonably > reproduceable procedure without any special jig. I had some generic cheap > round pins from ebay, and when you pull them out of the insulator, the > exposed soulder fits in the holes perfect. Good enough that they all line > up. It's just tedious to pull each pin individually out of the insulator > without breaking them, and it leaves a fairly large chunk of metal to nip > off after soldering, but it works. > > Aside from that it was a breeze. Popped right in and all 3 banks show up. > > https://photos.app.goo.gl/g1G4bo6FbjJSgcqU2 > > Thanks a lot! > > -- > bkw > >
