Can-do. Thank you. -- bkw
On Nov 27, 2017 7:14 AM, "Josh Malone" <[email protected]> wrote: > I'd start with cold start, hit enter, type beep, enter, and see if the CPU > and os is running. Assuming that they aren't, check the reset line with a > scope to make sure the CPU is being reset properly on power up and that > it's not held low (I think it's active low) since the nimh is in play on > this one. > > Also check power supplies to the various chips. > > On Nov 27, 2017 12:34 AM, "Brian White" <[email protected]> wrote: > >> Ok, what do I look at first? >> I don't suppose there is a common/frequent/likely answer to that? >> >> https://photos.app.goo.gl/3MXUjFmttEETro7m1 >> >> I notice the pattern of bars repeats. >> >> I have 2 other working 100's and this is a 3rd I didn't really want. I >> got it as part of an ebay item where I wanted something else. The nicd was >> just starting to corrode but hadn't yet leaked or anything. I've already >> replaced it with a new nimh. >> >> I suppose it doesn't hurt to have a parts doner, but why not at least >> take a shot at it eh? >> >> -- >> bkw >> >>
