The three plastic blocks attach along the long edge next to the Function keys if I recall. It should possible to see the little marks on the foam padding where they used to be. They slot onto the edge of the keyboard PCB with the larger part of the block towards the motherboard. That should allow the keyboard to sit correctly on the mother board. It should sit into the bottom case a little at the lower edge. You might find the function keys stick in their respective slots on the case top so can cause a little bulge.
I find the T102 case is fiddly to put back together the LCD and keyboard need to be correctly aligned on top of the motherboard otherwise the top will not fit properly. Happy New Year! From: M100 <[email protected]<mailto:[email protected]>> on behalf of Chris Kmiec <[email protected]<mailto:[email protected]>> Reply-To: <[email protected]<mailto:[email protected]>> Date: Sunday, December 31, 2017 at 6:21 PM To: <[email protected]<mailto:[email protected]>> Subject: [M100] Assembling 102 back together Happy new year everyone! Got my hands on a like-new 102, and decided to check the battery. Now I can't put this darn thing back together - they keyboard does not want to lay flat (pivots about the middle point), and there is these 3 little blocks that fell out when I opened it, that I suppose attach to the end of the keyboard board... What it means is that I can't put the top case back on without it having a bulge in the middle. Any ideas? Does anyone have
