Thanks, I was finally able to align it just right, but it seems a lot harder than M100...
On Sun, Dec 31, 2017 at 7:12 PM, Fugu ME100 <[email protected]> wrote: > The three plastic blocks attach along the long edge next to the Function > keys if I recall. It should possible to see the little marks on the foam > padding where they used to be. They slot onto the edge of the keyboard PCB > with the larger part of the block towards the motherboard. That should > allow the keyboard to sit correctly on the mother board. It should sit into > the bottom case a little at the lower edge. You might find the function > keys stick in their respective slots on the case top so can cause a little > bulge. > > I find the T102 case is fiddly to put back together the LCD and keyboard > need to be correctly aligned on top of the motherboard otherwise the top > will not fit properly. > > Happy New Year! > > From: M100 <[email protected]> on behalf of Chris Kmiec < > [email protected]> > Reply-To: <[email protected]> > Date: Sunday, December 31, 2017 at 6:21 PM > To: <[email protected]> > Subject: [M100] Assembling 102 back together > > Happy new year everyone! Got my hands on a like-new 102, and decided to > check the battery. Now I can't put this darn thing back together - they > keyboard does not want to lay flat (pivots about the middle point), and > there is these 3 little blocks that fell out when I opened it, that I > suppose attach to the end of the keyboard board... What it means is that I > can't put the top case back on without it having a bulge in the middle. > > Any ideas? > > Does anyone have > >
