So I'm playing with my WiModem232 and I still cannot get to to communicate reliably at any speed over 600 BPS.
I have hardware flow control on the WiModem232. My RS232 monitor (https://gglabs.us/node/1077) shows the control lines active. The question I have is: Is the T102's hardware flow control RTS/CTS or DTR/DSR? The WiModem232 documentation says this: "The WiModem232 can be configured for hardware handshaking. Typically this will be RTS/CTS, but some devices (like printers) may need DTR or DSR instead. By default, RTS/CTS handshaking is enabled and there is a bridge between DTR and DSR." He made the WiModem232 configurable, but to change this, I'll have to get our my soldering iron and I don't want to do that if I don't have to. -- Ron Lauzon - rlauzon at acm dot org Homepage: http://webpages.charter.net/rlauzon/ Weblog: http://ronsapartment.blogspot.com/ TRS-80 Pocket Computer 2 - TRS-80 Pocket Computer 4 - TRS-80 Model 100/102 Some people like to work on old cars. But old computers are cheaper and don't require a big garage.
