Hi,

It sounds like that problem has been around for a while.  While it would be 
nice to have it compile and run properly under linux, this problem is a bit 
beyond what I can do at this time, and I guess I'll leave it for someone else 
to decipher, or maybe I'll re-visit it when I have more time for something like 
that.  As long as I don't try and load anything it seems OK for me as well.  
There's always windows!!!

Jonathan

jonathan.y...@mykopat.slu.se
________________________________________
Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis 
[rkda...@burninghorse.com]
Skickat: den 12 februari 2018 18:02
Till: m100@lists.bitchin100.com
Ämne: Re: [M100] VirtualT patch (for Ken Pettit really)

i've gone through all the versions i've built on linux over the years,
or as many as I can find on various harddisks and and usb drives and it
looks like they all exhibit the same problems on the file menu. e.g.
weird file names and either can't load popup or segfault or just chunk
away to themselves happily, do nothing and return to main emu window.

doesn't matter which version of fltk i'd used and whether static or
shared libs so suspect it's a linux thing and/or a FLU thing (tried the
last version of FLU i can find, 2.14 which seems to be a version or two
newer than the version Ken used for VirtualT with no change). As my
patch fixes the warnings/errors for my current gcc version and leaves
the program in the same state as other builds i'm going to leave it for
a while until I have time to dig deeper into the file stuff in FLTK and FLU


bst rgrds

Russell



On 2/12/2018 1:42 AM, Jonathan Yuen wrote:
> Hi,
>
> I've been using fltk 1.3 and haven't tried any older versions.  But I don't 
> even think the mouse works in the file selection window that pops up.  The 
> simulator seems to be hung and I have to kill it.
>
> Jonathan
>
> jonathan.y...@mykopat.slu.se
> ________________________________________
> Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis 
> [rkda...@burninghorse.com]
> Skickat: den 11 februari 2018 15:29
> Till: m100@lists.bitchin100.com
> Ämne: Re: [M100] VirtualT patch (for Ken Pettit really)
>
> i just grabbed and tested some older versions of VirtualT that i've
> built over the years 1.5, 1.6, 1.7 with gcc versions in the 4.x series
> on the raspberry pi and the file menu works, well doesn't work in
> exactly the same way e.g. weird file names and the occasional segfault.
> i had been using fltk versions in the 1.3.x series in recent years
> although I do remember using 1.1.10 at one time so i'll downgrade my
> fltk back down to 1.1.10 and see what happens.
>
> bst rgrds
>
> Russell
>
>
> On 2/11/2018 8:45 AM, Jonathan Yuen wrote:
>> Hi,
>>
>> I've been doing this on x86_64 and it hangs on the file menu all the time 
>> with a segfault.  I've been trying gcc 6.4.0 and 4.9.4 but neither seems OK.
>>
>> Jonathan
>>
>> jonathan.y...@mykopat.slu.se
>> ________________________________________
>> Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis 
>> [rkda...@burninghorse.com]
>> Skickat: den 11 februari 2018 14:33
>> Till: m100@lists.bitchin100.com
>> Ämne: Re: [M100] VirtualT patch (for Ken Pettit really)
>>
>> the file menu is not great. half the time it segfaults, ok about 80% of
>> the time it segfaults on the actual load and the filenames can look a
>> bit weird. but i don't normally do much from the file menu anyway so it
>> wasn't a big deal for me.
>>
>> i didn't expect a simple cast  to work 100% of the time but googling the
>> "correct" way to handle the error looked really complicated and was C++
>> above my pay grade so I took the easiest way out.
>>
>> bst rgrds
>>
>> Russell
>>
>>
>> On 2/11/2018 4:15 AM, Jonathan Yuen wrote:
>>> Hi,
>>>
>>> Did it run OK?  More specifically, could you load a file?  The reason I ask 
>>> is that I've played with that error in Flu_DND.cpp and while I can get it 
>>> to compile, and it sort of loads OK, but I get errors when I try and load a 
>>> file.
>>>
>>> Haven't really taken it any further.
>>>
>>> Jonathan
>>>
>>> jonathan.y...@mykopat.slu.se
>>> ________________________________________
>>> Från: M100 [m100-boun...@lists.bitchin100.com] för Russell Davis 
>>> [rkda...@burninghorse.com]
>>> Skickat: den 10 februari 2018 21:31
>>> Till: Model 100 Discussion
>>> Ämne: [M100] VirtualT patch (for Ken Pettit really)
>>>
>>> I was building VirtualT yesterday using gcc 6.3.0 (the default on the
>>> latest raspbian) and  got a couple of warnings and errors. fixed them so
>>> that VirtualT would compile cleanly. whether they are "correct" or not I
>>> don't know but everything seems ok. In case anyone or Ken are interested
>>> i've attached a patch file to this email
>>>
>>>
>>> bst rgrds
>>>
>>> Russell
>>>
>>>
>

Reply via email to