SUCCESS! Per John’s suggestion (and was thinking the same thing when he suggested it) I now have a working system. I started trying different combinations of DVI/M100/cable (of which I have 2 each).
DVI #2, M100 #2, Cable #2, no luck So I swapped out M100 #2 (32K) for M100 #1 (24K/REX), and it worked! It’s still a little finicky and doesn’t always work, but has worked multiple times now. I don’t know if there’s anything I can do to “tune” it so it’s more consistent, but I”m pumped that I finally got it to work. I had tried this M100/cable combination with DVI #1, so I’m wondering if there’s an issue with that DVI. There also must be an issue of some sort with M100 #1 as the current DVI/cable setup didn’t work with that machine, but does with the other. This sure seems like a finicky setup. I would love to see a modern DVI replacement, perhaps with SD card for disk and video output, that would take up far less desk space and be more robust. Thanks all! Any other suggestions for troubleshooting why the M100 (#2) doesn’t work with this and also why DVI #1 doesn’t work with either M100 would be much appreciated. Randy > On Feb 17, 2018, at 4:22 PM, Randy Kindig <[email protected]> wrote: > > I was just thinking the same thing John. It’s worth a try. > > Thanks > > Sent from my iPhone > >> On Feb 17, 2018, at 3:07 PM, John R. Hogerhuis <[email protected]> wrote: >> >> Btw it occurs to me that there are 16 permutations possible there. Not so >> high that you couldn’t do all 16 and see if you ever get different results >> in any of 16 if you haven’t already. >> >> — John.
