> The reason for doing it is that we can. Ah, right, of course; I forgot ;-) ----- Original Message ----- From: Gary Hammond To: [email protected] Sent: Sunday, February 18, 2018 1:43 AM Subject: Re: [M100] List of wanna haves
I had a go at using both 3.5" and 5.25" in the DVI at the same time. I was able to create a boot 3.5" boot disk and had it booting from the 3.5" drive. Of course the problem is that the format of the 3.5" disk bears no resemblance to the TPPD/TPPD2. The reason for doing it is that we can. Do we need any other reason? From: M100 [mailto:[email protected]] On Behalf Of Mike Stein Sent: Sunday, 18 February 2018 6:52 PM To: [email protected] Subject: Re: [M100] List of wanna haves It's been a long time, but IIRC there was no problem using the 3.5" disks; of course you didn't gain any capacity and they did still only store 360KB. Are any of the other folks who played with this still on the list by any chance? The 4-drive version shown was only a mockup IIRC, but I see no reason why it couldn't work with a couple of switches to switch between 5.25 and 3.5. Unfortunately I can't remember now why we did it... ;-)
