Brian, that DVI Wiki is awesome, thank you. I've ordered some gender-changer male pin headers, so next weekend I should have a working 102 setup.
On a side note, LCD on the 100 that came with the DVI has started flickering and dimming, but the computer itself has also started crashing, after using for a bit. I think I'll go through all the caps and replace them, and clean the LCD connectors. On Fri, Mar 16, 2018 at 10:58 AM, Mike Stein <mhs.st...@gmail.com> wrote: > That's a possibility, but as far as I can tell no combination of what > Chris has would work with a 102/200. > > m > > ----- Original Message ----- > *From:* Brian White <bw.al...@gmail.com> > *To:* m...@bitchin100.com > *Sent:* Friday, March 16, 2018 9:49 AM > *Subject:* Re: [M100] DVI cable for 102 > > Probably someone ends up with 3 cables because probably a single long, > 100-only cable (and a 100-only system disk) came with the DVI, and the two > short ones came later with the 100/200 system disk. > > > >