I used to connect my 100 to a tnc and send a text file to our newsletter editor but the tnc handled the translation. There are a lot of the old tnc out there but most use would be with WinLink or fldigi (with sound card or Signalink) rather than the packet we used to use.
Sent from my iPhone Don (Motoman) Williams kd6uvt 951.264.0219 (cell) > On Jul 28, 2018, at 10:24, Lee Kelley <[email protected]> wrote: > > The only ways I've seen a Model T used with ham radio, and I'm sure I don't > know it all, is just for logging or packet with a TNC. > >> On Sat, Jul 28, 2018 at 12:15 PM Douglas Quagliana <[email protected]> >> wrote: >> I'd like to know if there's a way to get the cassette port to recognize >> AX.25 Bell 202 packet radio tones (1200 Hertz and 2200 Hertz at 1200 baud). >> I think the cassette port audio input pin get routed to the CPU but it only >> knows "HI" and "LO" so I don't think it can detect sinewave waveforms, but I >> would really like to be proven wrong on this. If it worked, it would let you >> run packet radio right off the cassette port and use the cassette motor as >> a push-to-talk. >> >> Anybody know for sure about the processing of audio input on the cassette >> port audio input pin? >> Douglas >> >>> On Fri, Jul 27, 2018 at 7:49 PM, Jeff Gonzales <[email protected]> >>> wrote: >>> Anyone still using their Model T for ham radio? >> > > > -- > "I will never in my lifetime make a film that cannot be seen by the whole > family" Arther P. Jacobs
