Those would be nice, but won't work with the TPDD cable PCB I designed. It was made to fit inside the housing of a DB25 and eliminate soldering wires to the lugs. Instead it fits between the two rows of lugs and they solder directly to the board.
On Mon, Nov 19, 2018 at 11:59 AM Mike Stein <[email protected]> wrote: > I use molded PC printer cables for this sort of thing; around here you can > find them for $1 at various charity etc. shops and not only do they save > soldering the connector but the molded connectors fit the M100 perfectly. > > > > ----- Original Message ----- > From: Rick Shear > To: [email protected] > Sent: Monday, November 19, 2018 5:40 AM > Subject: Re: [M100] WTB: TPDD cable > > ... One point of note, the DB25 connector on the original cable was > molded. Using a screw together type of connector as I did, while > electrically worked fine in my tests, did not fit well inside the allowed > space for the serial connection on the model 100 because the case opening > was just a bit too narrow. >
