I'd probably be interested. There are a lot of drives missing cables on eBay.
On Wed, Nov 28, 2018 at 1:35 PM Rick Shear <[email protected]> wrote: > A standard shroud works fine on the 102, it's only the 100 that has an > issue. So the extension, or modification would only be needed by 100 users. > > On Wed, Nov 28, 2018 at 12:20 PM Josh Malone <[email protected]> > wrote: > >> On Wed, Nov 28, 2018 at 12:18 PM Rick Shear <[email protected]> wrote: >> > >> > Please make sure you build yours and test it out before doing a group >> buy. While I have used mine, and I have had no issues show themselves, I >> really don't use my drive much. I've shifted a lot of my time over to a >> Model 3 project machine and haven't worked on the 100 in a while. My tests >> mostly consisted of transferring floppy.co from my utility disk, >> formatting a new disk, copying files to and from a disk, and making a >> backup of a disk. All these functions worked as expected. >> >> Yeah. I don't actually have a TPDD, so I'm gonna have to build a >> prototype and send it to be tested first. :-/ >> >> > As for the DB-25's not fitting into the 100, an easy fix is to file off >> the lips on the shroud that wrap over the top of the connector. Once this >> is done, put a screw with nut through each of the side wings to keep the >> shroud attached. I believe this should give you the extra length to get >> engagement into the port on the 100. >> >> I'm looking through my options for connector shells. Trying to cut the >> labor down. :) >> >> -Josh >> >
