In my experience it's an issue of good contact pressure between all pins and the socket, and the proper spacer between rex and the socket bottom.
-- John. On Tue, Jan 22, 2019, 5:20 PM Greg Swallow <[email protected] wrote: > Figured that when I first experienced the stall. Examined the plating on > the Rex and it all looks good. Don't think it would be the socket as I > re-installed the SR and it continues to function fine. Tiny is an attempt > to get TPDD support loaded so I can load the rf149.co file and rebuild > the Rex. > > Thank you, > > Greg > > ----- Original Message ----- > From: "John R. Hogerhuis" <[email protected]> > To: [email protected] > Sent: Tuesday, January 22, 2019 6:11:01 PM > Subject: Re: [M100] Unable to Load TEENY to MT > > The most likely issue in a new Rex install is that the pins of the optrom > are not all making good contact. > > If the firmware is corrupted (unlikely) teeny isn't going to help. > > -- John. >
