are you transferring at 300baud? I would try that. sounds like you are dropping bytes due to no flow control possibly.
On Wed, Jan 23, 2019 at 1:21 PM Greg Swallow <[email protected]> wrote: > When I used TEXT to capture I got what looked ok, until I checked the > lines that errors mentioned. There I could see something was missing. The > latest was the OD error in TS-DOS. > > Did some switching around and used my Portege with mComm, in hopes it was > a Win7 64-bit issue. Same errors there, but injecting TS-DOS did get > farther and actually ran after the injection before it got the OD error. I > will try capturing in text next. I did also check my cables between two MT > and got full/half duplex in TERMINAL, so cable should be ok. That doesn't > eliminate the USB-RS232 adapter though. I am beginning to think there may > be the problem. I'll let y'all know what happens. > > God Bless, > > GregS <>< > > ----- Original Message ----- > From: "Kurt McCullum" <[email protected]> > To: [email protected] > Sent: Wednesday, January 23, 2019 10:41:09 AM > Subject: Re: [M100] Unable to Load TEENY to MT > > Yes. But there is also LaddieAlpha. That may work for you. > > When you opened the file in TEXT, what ended up being sent to the > machine? It should have given you some data even if it was garbage. > Kurt > >
