Agreed. TELCOM only uses XON/XOFF. I'm curious about this so I'll dust off my 200 and do some testing.
Kurt On Thu, Jul 18, 2019, at 1:21 PM, John R. Hogerhuis wrote: > > > On Thu, Jul 18, 2019 at 1:01 PM Kurt McCullum <[email protected]> wrote: >> __ >> >> One test for the original poster. If you are using a full null cable, just >> enable RTS/CTS on your settings and give it a try. This would eliminate the >> question. >> >> I say this because my T200 gave me a few issues when I was developing mComm. >> The thing that was strange was I had to have RTS/CTS enabled on the PC side >> so I could talk to TELCOM. I realize that goes against conventional wisdom, >> and that may be the case for 'my' T200 but I thought I would throw that out >> there. >> > > LaddieAlpha asserts all flow control lines too. But I've never done a careful > test. > > All I know for certain is that flow control doesn't work to do flow control > of the peer > > -- John.
