Hi Fred, Honestly my first thought here is ... what software are you running and have you ever done a total wipe of rex followed by a reload from scratch of the software?
These symptoms more or less sound like corruption of the directory which can happen on older software loads. I've tried to catch all the fixes in my last supported software load. Which is at bitchin100. ..Steve On Saturday, July 27, 2019, Fred Whitaker <[email protected]> wrote: > I have been having trouble with my REX chip becoming loose and losing data > as a result. The computer also locks up. I was wondering if anyone had any > ideas about better support for the chip corners, instead of a loose piece > of wood under it. > I was thinking of trying to find some small diameter thin stick on feet, > about 1/8 inch thick. Has anyone had a similar problem? > The problem will be the same with any of the ROM's on similar boards. The > Super ROM that I have is on a similar board but it also has a full length > spacer glued to the bottom of the board. > Until I can resolve this issue I am putting my REX chips in storage. This > is only true for the Model 100 and Model 102. >
