Just built it on raspbian (debian stretch) on a raspberry pi. had to use
an older version of gcc (4.8) as it failed using gcc6. i'm using
fltk-1.3.4. As i'm using an ARM board I had to make a few mods to the
makefile and recall having to make a few mods to linking order and
libraries linked that I scripted. it shouldn't take much to either
remove the ARMisms or mod the standard makefile
maybe the script will help
https://gist.github.com/ukscone/577b2c8f186b4bffacc0222552dc852c
bst rgrds
Russell
On 9/24/2019 3:40 AM, r cs wrote:
If you've successfully rebuilt VirtualT under Linux lately I'd
appreciate hearing what configuration you used to do it please.
My Linux daily driver has issues building FLTK which I will continue
working on, but I'm taken enough with VirtualT I'd like to set up a
whole Linux laptop dedicated just to building and running VirtualT so
I can keep it running literally forever (at least from my point of
view), so I'm open to create a purpose-built, known-good Linux
configuration.
Information on if you're using /<whatever>/ Linux /x.x/, with FLTK
x.x.x, and xft and freetype 2 release /x/, and gcc /x.x.x/ etc. would
be most appreciated.
Thanks!
rcs
--
/Níl aon tinteán mar do thinteán féin. /[Irish Gaelic]
(There is no fireside like your own fireside.)
