Just as long to go sailing from Ottawa... ----- Original Message ----- From: Stephen Adolph To: [email protected] Sent: Saturday, November 30, 2019 6:37 PM Subject: Re: [M100] conio.h
It's a long drive to go snowmobiling from Daytona! On Saturday, November 30, 2019, Howard Pepper <[email protected]> wrote: You should become a snowbird... there's always room for one or three more in Daytona ;) On 11/30/19 4:12 PM, Stephen Adolph wrote: yes! they sure have. We've had snow on the ground since early November now. It's mostly melted but we got below zero and mostly stayed there. On Sat, Nov 30, 2019 at 11:40 AM Ken Pettit <[email protected]> wrote: Winter months have arrived in Canada, eh? ;) On 11/30/19 6:29 AM, Stephen Adolph wrote: > hi folks, > I'm going to be doing some application development on Borland Turbo C > (on a Zenith Z-171) to target the M100. > the plan is to develop in Turbo C, and essentially simulate the M100 > console. 80x25 is >> 40x8. > > CONIO.H is a library in Turbo C that lets you do basic io to the > screen, and lets you manipulate cursor location, get keyboard input etc. > > Once I like the application on the XT platform, I will recompile it in > BDS-C to run inside CP/M, on the M100. > > To do that, I think I need CONIO.H for BDS-C. > > Does anyone have a CONIO.H for M100 C compiler ex. small C? If there > was a starting point then I could modify it to run in BDS-C. > > Otherwise, I'll have to start from scratch for that. > > cheers > steve >
