Power cycling never works on mine, I had a lot of issues getting my REX working in my M100. Calling it does the trick though, I think I'm using the most recent firmware.
Just spend last hour typing away on my M100 - DVI setup, I could get used to this hehe. Though after saving my document to floppy, I told it to save to memory and my M100 started clicking internally every 5-7 seconds :-/ On Fri, 27 Mar 2020, 4:17 pm Stephen Adolph, <twospru...@gmail.com> wrote: > Also CNTL-X from MENU works. It is a keyboard shortcut for REX. Assume > you are on latest software. > > What de-install means > 1) the hooks REX uses to interfere with the OS are removed > End result > * any optrom that was configured and made available, remains available, > until you power off > * this allows other software to occupy the "LOWRAM" location, allows other > hook programs, etc., > > you can always get back to REXManager by power cycling, and either > re-running REXMGR, or by Call 63012. > > > On Fri, Mar 27, 2020 at 11:22 AM James Zeun <james.z...@gmail.com> wrote: > >> Thanks Josh! >> >> I just figured it out and feel a prize fool lol >> >> I've got the extension cable for my DVI and thought I'd figure out a >> procedure for using my DVI alongside my REX. >> >> >> >> Sent from my iPad >> >> On 27 Mar 2020, at 3:18 pm, Josh Malone <josh.mal...@gmail.com> wrote: >> >> Enter rexmgr and select DeIn (F7) to uninstall rexmgr >> >> >> On Fri, Mar 27, 2020 at 11:15 AM James Zeun <james.z...@gmail.com> wrote: >> >>> Hey guys >>> >>> I've never done this before, but I know someone mentioned I could use a >>> command to uninstall the rex manager from memory. It's not as simple as >>> KILL "rexmgr" is it? >>> >>> >>> >>> Sent from my iPad >> >>
