Interesting - I hadn't thought to try call 911 without the ROM being initialized, but as you say, it works fine! I'll swap my BX out for the non-development one though. I've noticed that if you go into REXMGR and re-select the Cleuseau ROM, it installs. Until power up, but that is a less error-prone method of installing, for me at least.
Thanks guys! On Mon, May 11, 2020 at 6:19 PM Peter Noeth <[email protected]> wrote: > According to my information, version R2C1D.BX was some kind of development > version, undocumented as far as I can tell. > > I use RC2100.BX myself, but only the ROM II portion ("CALLl 911" from > BASIC each time you want to use one of it's functions), and have defined > F6, in BASIC to access it { type: KEY 6,"CALL 911"+CHR$(13) }. BASIC will > remember this F6 definition until you change it or cold boot. > > I just checked the Cleuseau portion ("CALL 63012") and I also see that > Cleuseau seems to disable upon power cycle. Since I don't use it, I never > noticed this behaviour. The REX documentation does not say if when > activating an Option ROM, it stays active thru power cycles. Only that REX > remembers which Option ROM you have selected to be the default one. REX > also uses the CALL 63012 command to initialize itself, so I would expect > there to be some power on conflict there. > > Regards, > > Peter > >> >> ------------------------------ >> >> Message: 2 >> Date: Sun, 10 May 2020 11:26:01 -0500 >> From: Dan Higdon <[email protected]> >> To: [email protected] >> Subject: [M100] Cleuseau ROM and REX? >> Message-ID: >> <CALGy=cdw=od4e+W9rHyYVcdTgAU1sTb_Rsy= >> [email protected]> >> Content-Type: text/plain; charset="utf-8" >> >> I've noticed when trying out Cleusea ROM2 from my REX that the ROM doesn't >> stay "installed" when I cycle power. >> >> Is this normal behavior? >> >> I just started playing around with this ROM, and since programming is >> mostly what I use my ModelT.102 for, this thing is great. >> >> I'm using the file named R2C1D.BX as my image. How is that different from >> R2C100.BX, and could that be my problem? >> >> Thanks, >> /hdan >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: < >> http://lists.bitchin100.com/private.cgi/m100-bitchin100.com/attachments/20200510/68b0637c/attachment-0001.html >> > >> >> ------------------------------ >> >> Message: 3 >> Date: Sun, 10 May 2020 12:34:41 -0400 >> From: Stephen Adolph <[email protected]> >> To: "[email protected]" <[email protected]> >> Subject: Re: [M100] Cleuseau ROM and REX? >> Message-ID: >> < >> camcmnv7t5f_qtkmkkjnti2oo87+tnr5k71q8am2etvorh-k...@mail.gmail.com> >> Content-Type: text/plain; charset="utf-8" >> >> Not sure of the answer anymore, but has been a long time. >> >> Rex and rom2 use the same software hooks so there is some interaction. >> >> When the laptop is power cycled, rex has to to auto configure. I may have >> not been able to maintain the hooks for the selected rom. >> >> <snip> >
