Yes machine code can access ram using any of the three banks so long as you pay attention to how the m100 works.
Basic .. I dont think so. Option rom space..no. Lower 16k of ram...no. Upper 16k of ram..no. On Saturday, June 13, 2020, Mike Stein <[email protected]> wrote: > Of course I meant accessible to BASIC or ML in native M100 mode. > > ----- Original Message ----- > *From:* Mike Stein <[email protected]> > *To:* [email protected] > *Sent:* Saturday, June 13, 2020 10:33 PM > *Subject:* Re: [M100] REXCPM update > > Is the 2/4MB RAM accessible to the M100, perhaps as individually > addressable 32 KB pages in the OptROM address space? > > m > > ----- Original Message ----- > *From:* Stephen Adolph <[email protected]> > *To:* [email protected] > *Sent:* Wednesday, June 10, 2020 10:27 PM > *Subject:* Re: [M100] REXCPM update > > Looks like a new FAQ item! > > You literally get an M100 with REX and a separate CP/M system to use. > > You can switch between the 2. > > ..steve > > > On Wednesday, June 10, 2020, Josh Malone <[email protected]> wrote: > >> On Wed, Jun 10, 2020 at 8:49 PM Stephen Adolph <[email protected]> >> wrote: >> >>> Thank you everyone for the interest! >> >> >> Thank you and others on the project for making this amazing advance in >> Model-T technology! >> >> >>> I have indications for about 2x what I have on hand, but I have parts >>> here to build to meet the need. Nothing to order and wait for... >>> >> >> I hadn't gotten the chance to signal my interest, as well. Also, I was >> wondering if you wanted to make a few units available for sale at Tandy >> Assembly (assuming it happens this year). >> >> >> One thing that is missing on the wiki is how to install in T102. I will >>> take some pics and write a few notes. T102 requires a worr to be soldered >>> in. >>> >> >> I'm quite comfortable w/ modding systems, and would love to get on the >> list for a T102 version. >> >> I am adding an FAQ to the wiki page, which I will add to as you ask >>> questions about things that may not be clear. >>> >> >> My biggest question so far is: Is this a pure CPM device? Or does it have >> utility in "Tandy" mode as well? >> >> Thanks, again! >> >> -Josh >> >
