Huh? ----- Original Message ----- From: Gregory McGill To: [email protected] Sent: Tuesday, June 30, 2020 11:20 AM Subject: Re: [M100] REXCPM orders update
2. answer yes to both questions. After this completes your rex will be init but have no roms. note if you load tpdd on your rex you will get an error in line 10 due to out of memory and you should change the clear command to clear 1000,MAXRAM 3. you will need to load the roms from the files here (link) over tpdd 4. to load rexcpm here is the link to the instructions: (link) (note the clear command should be clear 2000,60000 not clear 60000) On Mon, Jun 29, 2020 at 5:48 PM Stephen Adolph <[email protected]> wrote: Quick Start So, you have just received your REXCPM and want to get going. Here's what you need to do... 1. Install your REXCPM 2. Initialize your REXCPM by running RXCINI.DO. This lets you load the RXCMGR application and initialize the directory. 3. Now you are ready to use REXCPM and RXCMGR. You can use it just like a REXclassic. Create ram backups, load option ROMs etc. whats not clear Greg? On Mon, Jun 29, 2020 at 8:41 PM Gregory McGill <[email protected]> wrote: You should make this more obvious in the docs Stephen, I had the same confusion as did Matt in town here..I walked him through it after I figured it out. On Mon, Jun 29, 2020 at 5:28 PM Stephen Adolph <[email protected]> wrote: REXCPM is all SRAM. It does not ship with software installed. You have to install the REX Manager "rom" file into REX using the RXCUTL.DO program. Did you do that? once you have the ROM image loaded into block 0, you can use the same CALL. Steve On Mon, Jun 29, 2020 at 8:22 PM Tom Dison <[email protected]> wrote: Quick question - in the directions it says install, restart and ensure Rex manager is running. I don't see rexmgr. With the REX I had to do, call 63012. That didn't work with this. Is there a similar call statement for this? On Mon, Jun 29, 2020, 6:38 PM Stephen Adolph <[email protected]> wrote: Well, I have built and tested everything but I am sad to report that I am the victim of counterfeit components. All the 4MB SRAMs that I bought are actually 2MB SRAMs! I've complained to the seller, and we'll see what they say about their "certified" parts. 4 MB SRAMs are hard to find at a reasonable price. I ordered the same product twice from the same seller. The first time I paid 2x what I paid the second time. I guess that's the hint right there. What does this mean? It means that everyone on this build that wanted 4MB (basically everyone) will have to settle for 2MB. Also, If I can't find 4MB parts for a reasonable cost, I may not be able to offer that version again. For the curious, here is what Digikey wants for the parts I spec'd https://www.digikey.ca/en/products/detail/cypress-semiconductor-corp/CY62177EV30LL-55ZXIT/2184405 Steve On Mon, Jun 29, 2020 at 11:19 AM r cs <[email protected]> wrote: Thank you kindly! I'm enjoying daydreaming about using them -- so enjoy summer first! I appreciate your efforts, and I hope you and yours are well. Take care! rcs On Mon, Jun 29, 2020 at 8:04 AM Stephen Adolph <[email protected]> wrote: For those who have reached out to order REXCPM- I'm sorry that they are not done yet! But the good news is that all the hardware is now built - 25 units. Next steps are to program them, debug/test, then package and ship. Thanks for your patience; it is summer time here and there are lots of time demands ;). cheers Steve -- Níl aon tinteán mar do thinteán féin. [Irish Gaelic] (There is no fireside like your own fireside.)
