One thing I forgotĀ If you are using the free/unlicensed version then there is no optimization. It could be the VT100 app was compiled with a licensed version of the compiler with some level of optimization.
From: M100 <[email protected]> on behalf of Ken Pettit <[email protected]> Reply-To: <[email protected]> Date: Saturday, July 18, 2020 at 2:22 PM To: <[email protected]> Subject: Re: [M100] PIC32MX (off topic but related!) > > Hey Steve, > > Configuration bits? Are you setting those correctly to ensure the proper > clock mode is selected, etc? > > Ken > > > On 7/18/20 2:02 PM, Stephen Adolph wrote: > > >> Well ok thanks guys. >> In a nutshell, ( long winded explanation of problem to follow)... >> >> >> >> >> The Geoff VT100 page has both Geoffs source project files as well a binary >> file that can be programmed. >> >> >> >> >> The binary contains the application plus bootloader >> >> >> >> >> When I try to build the project myself (unchanged) I get a different binary >> that does not seem to include the bootloader. In any case I cannot see a >> way to produce the same binary as what he provides. I cant relplicate his >> build. >> >> >> >> >> As well, I cant see anything that seems to relate to the bootloader >> functionality in the actual code. >> >> >> >> >> Very confusing. >> >> >> >> >> In any case, the code that MPLAB X produces can be programmed but it does not >> work. Meaning if I erase the part completely and then attempt to program my >> application, the device does not start after the application is loaded. >> >> >> >> >> However I know my binary works because if I program it OVER TOP of an MCU >> that has the original binary in it, I can thusly install my application and >> see it run. >> >> >> >> >> So it really seems like I can produce working application code .. but the >> bootloader portion cant be generated from scratch. I must be already in there >> by separate means for my application to work. >> >> >> >> >> >> >> >> So I am a bit stuck. The only way I can produce MVT100 processors is to >> first program with the original code and then overlay my code. >> >> >> >> >> Strange. >> >> >> >> >> Any thoughts? I really am a newbie on these things. >> >> >> >> >> Thabks Steve >> >>>> <Snip> >>>> >>>> >>> >>> >> >> > >
