The DVI uses separate inputs, one for the composite and one for the RF. The switch is to select channel 3 or 4 on the RF input. I’ve cleaned the inputs. I’d say that’s not it, I was hoping that was it a week ago that’s when I cleaned the inputs. I’d love to try the RF input but I no longer have an analog TV set and RF converter.
William Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: Mike Stein<mailto:[email protected]> Sent: Sunday, October 4, 2020 4:49 PM To: [email protected]<mailto:[email protected]> Subject: Re: [M100] CRT not working with DVI anymore. Any chance it's a little oxidation on the RF/composite selector switch? On Sun, Oct 4, 2020 at 3:58 PM William McKay <[email protected]<mailto:[email protected]>> wrote: Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 Using a Commodore 1084S monitor. Monitor works perfect with several other systems in composite mode. It use to work with my Model 100 DVI but started sometimes not coming on and now only comes on about one in ten tries. When it work it works perfect except I’ve seen it go out after about an hour several times? Anyone got a starting point for me to check? I did add a 2nd drive and this issues started slowly after but is getting worse. Might the old power supply not be up to my additional drive? Thanks, William
